Abstract:To study the impact of introducing fluorine atoms onto the conjugated phenyl side chains of benzo[1,2-b:4,5-b′]dithiophene (BDT)-based copolymers, three novel donor−π–acceptor (D−π–A) alternative polymers PE40, PE42, and PE44 were designed and synthesized. The phenyl-substituted-BDT, thieno[3,2-b]thiophene, and benzo[d][1,2,3]triazole (BTA) served as the donor, π-bridge, and acceptor units, respectively, to enable linear polymer backbones. When introducing two or four fluorine atoms into the phenyl side units of PE40, the polymers PE42 and PE44 demonstrate a gradual decrease of energy levels and an increase of crystallinity in the pristine and blend films. It was noted that the increase in fluorine atoms gradually improved the performance parameters of polymer solar cells (PSCs) with Y6 as the acceptor. The PE40:Y6 device yielded a power conversion efficiency (PCE) of up to 7.07% with a short-circuit (JSC) of 21.36 mA cm–2, an open-circuVOC) of 0.65 V, and a fill factor (FF) of 0.51, and PE42:Y6 exhibited a better PCE of 10.11% (JSC = 23.25 mA cm–2, VOC = 0.74 V, and FF = 0.59), while PE44:Y6 exhibited the best PCE of 13.62% (JSC = 25.29 mA cm–2, VOC = 0.82 V, and FF = 0.66). The suitable energy offsets between the donor and the acceptor, high and balanced charge-carrier mobility, and the optimal morphology of the blend film contributed to the high performance of PE44:Y6 combination. Our results demonstrate that introducing more fluorine atoms onto the phenyl side units of BDT is a prospective approach to break the trade-offs between VOC, JSC, and FF, and finally improve the performance of PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07720?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07720</a>.Detailed synthetic routes, characterization, TGA, DSC, UV–vis spectra in solution, photoluminescence spectra, energy level diagram, AFM, and device fabrication (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07720/suppl_file/am0c07720_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synthesis and Photovoltaic Properties of Silafluorene Copolymers Substituted by Carbazole and Triphenylamine Pendants

Synthesis and performances of chelating electrophosphorescent polymers based on different ancillary ligands

Highly Efficient and Stable Blue Polymer Light Emitting Diodes Based on Polysilafluorenes with Pendent Hole Transporting Groups

Synthesis and Photovoltaic Performance of Novel Thiophenyl-Methylene-9h-Fluorene-Based Low Bandgap Polymers

Synthesis and Photovoltaic Properties of an Alternating Polymer Based on Benzo[1,2-B:4,5-B′]dithiophene and Fluorine Substituted 4,7-Dithiophene-2-yl-2,1,3-benzothiadiazole

Siloles symmetrically substituted on their 2,5-positions with electron-accepting and donating moieties: facile synthesis, aggregation-enhanced emission, solvatochromism, and device application

Significantly Improved Photovoltaic Performances of the Dithiophene‐benzothiadiazole‐alt‐fluorene Copolymers by Incorporating Carbazole Units in Fluorene Moiety

New Disilyl-Substituted Poly(Phenylene Vinylene)-Related Polymers: Synthesis and Photoelectric Properties

Synthesis and photovoltaic properties of an alternating polymer based fluorene and fluorine substituted quinoxaline derivatives

Synthesis of a Terpolymer Containing Fluorene, Side Chain Conjugated Thiophene and Benzothiadiazole and Its Applications in Photovoltaic Devices

Influence of Difluoro Regio-Substitution Variations of Donor Polymers on the Non-Fullerene Solar Cell Performance

Random Terpolymer Based on Simple Siloxane-functionalized Thiophene Unit Enabling High-performance Non-fullerene Organic Solar Cells

Synthesis and Photoelectric Property of Silafluorene-incorporated Polyfluorenes

Fluorination on electron-deficient units of benzothiadiazole-based donor-acceptor conjugated polymers for novel fullerene-based organic solar cells

An alternating polymer with fluorinated quinoxaline and 2,7-carbazole segments for photovoltaic devices

Gradual Fluorination on the Phenyl Side Chains for Benzodithiophene-Based Linear Polymers to Improve the Photovoltaic Performance

Fluorene and silafluorene conjugated copolymer: A new blue light-emitting polymer

Understanding the Impact of Fluorine Substitution on the Photovoltaic Performance of Block Copolymers

Tuning Photovoltaic Performance Of 9,9-Dioctylfluorene-Alt-5,7-Bis(Thiophen-2-Yl)-2,3-Biphenylthieno[3,4-B] Pyrazine Copolymeric Derivatives By Attaching Additional Donor Units In Pendant Phenyl Ring

Synthesis and Photovoltaic Properties of Copolymers of Carbazole and Thiophene with Conjugated Side Chain Containing Acceptor End Groups

Synthesis and Electroluminescent Properties of the Copolymers of Fluorene and Dibenzothiophene