Abstract:Discontinuously reinforced titanium matrix composites (DRTMCs) with network structure have attracted much attention in recent years due to their superior strengthening effect and ductility. To figure out their microstructure characteristics of the as-rolled network-structured composites under different rolling temperatures, hot rolling deformation processes at α+β region, upper α+β region, β region were performed on a series of TiB whiskers reinforced Ti–6.5Al–2Zr–1Mo–1V–0.3Si (TA15) composites (TiB/TA15–Si). The results showed that with the increase of rolling temperature, primary α (αp) phases and silicides gradually decreased, while transformed β (βT) phases, secondary α (αs) phases and TiB aspect ratio gradually increased, which is attributed to the phase transformation, Si dissolution and lower deformation resistance. And the silicides were fractured into several parts at 900 oC due to the low solid solubility and excessive growth. Besides, the composite rolled at α+β region exhibited dominant dynamic recrystallization (DRX) of α phase, while the composite rolled at β region presented an elongated deformation of prior β phase inside the network and DRX behavior near the network. With the increasing rolling temperature, the composites showed an increasing trend in strength and a decreasing trend in ductility. The composite rolled at 1100 oC can obtain better overall ultimate tensile strengths of 1260 MPa (at RT), 843 MPa (at 600 oC), 729 MPa (at 650 oC) and 595 MPa (at 700 oC), which increased by 13.4%, 38.2%, 36.3%, 21.9% compared with those of the as-sintered composite, respectively. The superior strengthening mechanism of the as-rolled composites can be mainly attributed to grain refining of the matrix and load transfer of TiB.

Deformation Behaviors and Microstructure Evolution of TiBw/TA15 Composite with Novel Network Architecture

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Room temperature tensile fracture characteristics of in situ TiBw/Ti6Al4V composites with a quasi-continuous network architecture

IN SITU TiBW/Ti COMPOSITES WITH A NOVEL QUASI- CONTINUOUS NETWORK REINFORCEMENT ARCHITECTURE

Effects of Deformation Conditions on the Microstructure and Substructure Evolution of Tibw/Ti60 Composite with Network Structure

Influence of deformation parameters and network structure to the microstructure evolution and flow stress of TiBw/Ti64 composite

Hot Deformation Behavior of In-Situ TiBw/Ti6Al4V Composite with Novel Network Reinforcement Distribution

Flow Behavior and Microstructure Evolution of a TiBw/TA15 Composite with Network-Distributed Reinforcements During Interrupted Hot Compression

Differences in mechanical properties and high temperature deformation behavior between TiBw/Ti65 and TiBw/TA15 composites with network structure

Compressive behaviors and mechanisms of TiB whiskers reinforced high temperature Ti60 alloy matrix composites

Research on Hot Compressive Deformation of TiBw/TA15 Composite Cylindrical Billet with Network-Distributed Reinforcements

Deformation Behavior and Microstructure Evolution Mechanism of 5vol.% (tibw + TiCp)/Ti Composites During Isothermal Compression

Hot Deformation Behaviors of TiBw/Ti6Al4V Composites with Network Microstructure

High-temperature Deformation Behavior and Microstructure Evolution of TiBw/Ti6Al4V Composites During Hot Shear-Compression Deformation

Microstructure Evolution and Tensile Properties of As-Rolled TiB/TA15 Composites with Network Microstructure

Multiscale crystal plasticity finite element simulations of the deformation inhomogeneity of TiBw/TA15 composites with network-structured during hot rolling

The Microstructure Evolution and Mechanical Properties of TiBw/TA15 Composite with Network Structure Prepared by Rapid Current Assisted Sintering

Hot Deformation Behavior of Nano-Sized TiB Reinforced Ti-6Al-4V Metal Matrix Composites

Microstructure characteristics and enhanced properties of network-structured TiB/(TA15-Si) composites via rolling deformation at different temperatures

Effect of Heat Treatment on Microstructure Evolution and Mechanical Properties of 2.5 vol% TiBw/TA15 Composites with Different Deformation Statuses

Effect of microstructure on mechanical properties of net-structured TiBw/TA15 composite subjected to hot plastic deformation