Abstract:In this study, we evaluated the use of prickly pear seed cake, a by-product of prickly pear seed oil extraction, as a new precursor for producing activated carbon by phosphoric acid activation, and the obtained carbon’s capacity for heavy metal removal from aqueous solution. Response surface methodology based on the full factorial design at two levels (24) was developed to reduce the number of experiments and reach optimal preparation conditions for the removal of cadmium and lead ions from aqueous solutions. Design Expert 11.1.2.0 Trial software was used for generating the statistical experimental design and analyzing the observed data. Factors influencing the activation process, such as carbonization temperature, activation temperature, activation time, and impregnation ratio, were studied. Responses were studied in depth with an analysis of variance to estimate their significance. Each response was outlined by a first-order regression equation demonstrating satisfactory correspondence between the predicted and experimental results as the adjusted coefficients of correlation. Based on the statistical data, the best conditions for the removal of heavy metals from aqueous solution by the obtained activated carbon were indicated. The maximum iodine number and methylene blue index were 2527.3 mg g−1 and 396.5 mg g−1, respectively, using activated carbon obtained at the following conditions: Tc = 500 °C, Ta = 500 °C, impregnation ratio = 2:1 (g H3PO4: g carbon), and activation time of two hours. The maximum adsorption reached 170.2 mg g−1 and 158.4 mg g−1 for Cd2+ and Pb2+, respectively, using activated carbon obtained at the following conditions: Tc = 600 °C, Ta = 400 °C, impregnation ratio = 2:1 (g H3PO4: g carbon), and activation time of one hour. The activated carbon obtained was characterized by Boehm titration, pH of point of zero charge (pHPZC), Brunauer–Emmett–Teller surface area (SBET), and scanning electron microscopy. Adsorption was performed according to different parameters: pH solution, adsorbent dosage, temperature, contact time, and initial concentration. Regeneration experiments proved that the obtained activated carbon still had a high removal capacity for Cd2+ and Pb2+ after five regeneration cycles.

Effect of Activated Carbon Prepared from Grapefruit Peel on the Treatment of Heavy Metal Copper

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Removal of Heavy Metal Ions (Pb2+, Co2+, and Cd2+) by Activated Carbon from Cypress Fruit: An Investigation of Kinetics, Thermodynamics, and Isotherms

Poly(N,N-dimethylaminoethyl methacrylate) modification of activated carbon for copper ions removal

Production of Mesoporous Activated Carbon from Tea Fruit Peel Residues and Its Evaluation of Methylene Blue Removal from Aqueous Solutions

The Treatment of Cadmium-contained Wastewater Using Activated Carbon Prepared from Anaerobic Digested Residue of S.alterniflora

Technological Process and Mechanics of Adsorption of Heavy Metal Cadmium by Modified Activated Carbon

Copper ion removal from aqueous media using banana peel biochar/Fe3O4/branched polyethyleneimine

Adsorption of copper from water using TiO2-modified activated carbon derived from orange peels and date seeds: Response surface methodology optimization

Activation of grapefruit derived biochar by its peel extracts and its performance for tetracycline removal

Comparative study of the elimination of copper, cadmium, and methylene blue from water by adsorption on the citrus Sinensis peel and its activated carbon

Preparation of melon peel biochar/CoFe2O4 as a new adsorbent for the separation and preconcentration of Cu(II), Cd(II), and Pb(II) ions by solid-phase extraction in water and vegetable samples

Synthesis, Characterization, and Biosorption of Cu2+ and Pb2+ Ions from an Aqueous Solution Using Biochar Derived from Orange Peels

Preparation and Characterization of Cellulose-Based Adsorbent and Its Application in Heavy Metal Ions Removal.

The Effect of Activated Carbon Fiber Structure and Loaded Copper, Cobalt, Silver on the Adsorption of Dichloroethylene

Optimization of the Preparation of Activated Carbon from Prickly Pear Seed Cake for the Removal of Lead and Cadmium Ions from Aqueous Solution

Walnut shell-based activated carbon with excellent copper (II) adsorption and lower chromium (VI) removal prepared by acid-base modification

Comparative Study on the Adsorption Characteristics of Heavy Metal Ions by Activated Carbon and Selected Natural Adsorbents

Preparation and Adsorption Performance of a Cellulosic‐adsorbent Resin for Copper(ii)

Effect of activated carbon addition on copper recovery from printed circuit board by bacteria

Effect of Properties of Activated Carbon on Malachite Green Adsorption