Abstract:Due to their excellent high-temperature strength, and good oxidation resistance, Ni(3)Albased alloys have long attracted considerable interest as a class of high-temperature structural material. These properties, combined with their unique high thermal conductivity, make them ideal for special applications, such as blades in gas turbines and jet engines. However, polycrystalline Ni3Al alloys show almost no ductility and extremely low fracture resistance at ambient temperatures. Ni3Al alloys with the high ductility at room-temperature can be adjusted by the microstructure through directional solidification (DS) and matching. It has been shown that the electric field can refine the solidification structure, reduce the dendrite spacing, promote the diffusion and change the solute redistribution in the solidification process. In order to improve the room temperature ductility of Ni3Al alloy, the effect of current intensity on microstructure of DS Ni-25Al alloy is investigated. In this work, the effects of constant current intensity and NiAl phase on the microstructure are researched. The results show that in the DC electric field, as the result of the aggregation of current along dendrite tip and the Joule heat at the tip of dendrite, the primary dendritic spacing (lambda) decreases with the increasing of current intensity. And the solid-liquid interface tends to be straight resulting from the Joule heat and Peltier effect caused by the segregation of current and the difference in conductivity between solid and liquid interface. When no direct current is applied the DS samples contain the L12 structure of Ni3Al matrix and B2 structure of NiAl precipitate phase. The microstructure is a duplex structure which consist of gray Ni3Al matrix and black NiAl precipitates. NiAl precipitates with regular shape and has obvious orientation along with the growth direction. When the DC current is applied, NiAl precipitates is irregular and dispersion and has no obvious directionality, due to Joule heat effect generated by the current effect, the undercooling increased and the precipitated NiAl phase transformed into thin martensite NiAl phase with twin crystal symmetry from the NiAl-B2 type structure.

Microstructure and Mechanical Properties of Ni 3 Al Intermetallics Prepared by Directional Solidification Electromagnetic Cold Crucible Technique

Dependency of Microstructure and Microhardness on Withdrawal Rate of Ti-43Al-2Cr-2Nb Alloy Prepared by Electromagnetic Cold Crucible Directional Solidification

Effect of Current Intensity on Microstructure of Ni3Al Intermetallics Prepared by Directional Solidification Electromagnetic Cold Crucible Technique

Effect of Withdrawal Rate on the Microstructure of Directional Solidified Ni-43Ti-4Al-2Nb-2Hf Single Crystal Alloys

Microstructure and Mechanical Property of Directionally Solidified NiAl–Cr(Mo)–(Hf, Dy) Alloy at Different Withdrawal Rates

Microstructural Characteristics of Directionally Solidified Alloys Ni-44Ti-5Al-2Nb-1Mo

Study on characteristics of directionally-solidified microstructure for NiAl-Mo eutectic composites

Effect of Withdrawal Rate on Microstructure of Directionally Solidified Ni-45Ti-5Al Alloys

Effect of solidification parameters on the microstructures of a single crystal Ni-based superalloy AM3

Effect of Withdrawal Rate on Microstructure and Mechanical Properties of a Directionally Solidified NiAl-based Hypoeutectic Alloy Doped with Trace Hf and Ho

Effect of Withdrawal Rate on the Microstructure and Mechanical Properties of a Novel Monocrystalline CoNi-based Superalloy

Microstructural Characterization and Phase Separation Sequences During Solidification of Ni3Al-Based Superalloy

Effect of Withdrawal Rate on the Microstructure and Room Temperature Mechanical Properties of Directionally Solidified NiAl–Cr(Mo)–(Hf, Dy)–4Fe Alloy

Microstructure Evolution of Directionally Solidified Al-12%Ni Hypereutectic Alloy

Effects of Solidification Parameters on Microstructures of Ni3Al Based Single Crystal

Effect of Withdrawal Rate on the Microstructure of Directionally Solidified NiAl–Cr(Mo) Hypereutectic Alloy

Effects of Withdrawal Rate and Temperature Gradient on the Microstructure Evolution in Directionally Solidified NiAl-36Cr-6Mo Hypereutectic Alloy

Microstructural Characteristics of Directionally Solidified Ni-43ti-4al-2nb-2hf Alloy

Microstructural Control and Mechanical Properties of Ti–47Al–2Cr–2Nb Alloy by Directional Solidification Electromagnetic Cold Crucible Technique

Alloying Effect on Microstructure and Mechanical Properties of Directionally Solidified Ti-Al-Nb Alloy

Effect of Withdrawal Rate on the Microsegregation, Thermophysical Properties and Spatial Orientation of a Ni3Al Based Single Crystal Superalloy