Abstract:Permanent magnet Vernier motors (PMVMs) possess the advantage of high torque density for high-performance applications. However, the low power factor challenge makes it unacceptable for direct-drive applications. A lack of accurate modeling method based on the motor sizing law, i.e., air-gap flux density, linear current density, and motor geometry parameters, raises difficulties for machine designers to further conduct research on the performance metrics. This article presents a deep investigation into the analytical modeling technique for surface PMVMs (SPMVMs). It can identify an accurate approach to obtain the performance metrics, including electromagnetic torque and power factor. The modeling technique is developed based on the conformal mapping method. By using this, both radial and tangential permeability functions can be calculated to obtain the motor magnetic loading accurately, considering the leakage flux. The slotting effect on both air-gap flux density and armature-winding function is analyzed to achieve a precise formula for torque and power factor computations. The new modeling technique is applied to integral-slot SPMVMs with different slot/pole combinations, gear ratios, slot openings, and magnet thickness to evaluate the impacts of motor parameters on high-power-factor and high-torque-density designs. Finally, an SPMVM with the characteristics of high torque density and power factor is fabricated to verify the analytical model at the power rating of 0.8 kW and the speed of 500 r/min. The experimental results show that the prototype exhibits a high power factor of 0.9 and high torque density 22.5 Nm/L.

Effect of Structure Parameters on the Losses and Efficiency of Surface-Mounted Pmsm

Influence of Key Parameters on Torque to Mass Ratio in Surface-Mounted PM Machines with Non-Overlapping Windings

Comparison of Optimal Design and Performance of PM Machines Having Non-Overlapping Windings and Different Rotor Topologies

Efficiency Optimization of PMSM Drives Using Field-Circuit Coupled FEM for EV/HEV Applications

Comparison of PMSMs with Different Rotor Structures for EV Application

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Influence of Load Characteristics on Three-Phase Short Circuit and Demagnetization of Surface-Mounted PM Synchronous Motor

Influence of Dimensional Parameters on Three-Phase Short Circuit and Demagnetization in Surface-Mounted PM Machines

Research on Rotor Loss and Rotor Structure Optimization of Rare Earth Permanent Magnet Synchronous Motors in the Weak Field Area

Analytical Calculation of Magnetic Field Distribution and Stator Iron Losses for Surface-Mounted Permanent Magnet Synchronous Machines

Design and analysis of high power density permanent magnet-assisted synchronous reluctance motor

Maximum Efficiency Per Torque Control of Permanent-Magnet Synchronous Machines

Influences of machine structure on high speed PM BLDC motor

Deep-investigated Analytical Modeling of a Surface Permanent Magnet Vernier Motor

Design Considerations, Analysis and Comparison for High-performance Surface Permanent Magnet Vernier Machines

Electromagnetic Design and Losses Analysis of a High-Speed Permanent Magnet Synchronous Motor with Toroidal Windings for Pulsed Alternator

Research on Interpolar Leakage Coefficient of PMSM with Variable Magnetic Reluctance in the Exciting Circuit

Analysis of Factors Designing Permanent Magnet Synchronous Motor

Sensitivity Analysis and Design of a High Performance Permanent-Magnet-Assisted Synchronous Reluctance Motor for EV Application

Magnetic Pole Optimization of Sinusoidal Pole-shaping Surface-mounted Multi-phase Permanent Magnet Synchronous Motors