Abstract:Context: In a very small surface separation, the fluid flow is actually multiscale consisting of both the molecular scale non-continuum adsorbed layer flow and the intermediate macroscopic continuum fluid flow. Classical simulation of this flow often takes over large computational source and is not affordable owing to using molecular dynamics simulation (MDS) to model the adsorbed layer flow, if the flow field size is on the engineering size scale such as of 0.01-10 mm or even bigger like occurring in micro or macro hydrodynamic bearings. The present paper uses full MDS to validate Zhang's multiscale flow model, which yields the closed-form explicit flow equations respectively for the adsorbed layer flow and the intermediate continuum fluid flow. Here, full MDS was carried out for the pressure-driven flow of methane in the nano slit pore made of silicon respectively with the channel heights 5.79 nm, 11.57 nm, and 17.36 nm. According to the number density distribution, the flow areas were respectively discriminated as the adsorbed layer zone and the intermediate fluid zone. The values of the characteristic parameters for Zhang's multiscale scheme were extracted from full MDS and input to Zhang's multiscale flow equations respectively for calculating the flow velocity profile and the volume flow rates of the adsorbed layers and the intermediate fluid. It was found that for these three channel heights, the flow velocity profiles calculated from Zhang's model approximate those calculated from full MDS, while the total flow rates through the channel calculated from Zhang's model are close to those calculated from full MDS. The accuracy of Zhang's multiscale flow model is improved with the increase of the channel height. Method: The recent modification of the optimized potential for liquid simulation (MOPLS) model was used to calculate the interaction force between two methane molecules. In order to calculate the interaction force between the wall atoms and the methane molecules accurately, our previous non-equilibrium multiscale MDS was used. The interaction forces between the methane molecule and the wall atom were obtained from the coupled potential function by the L-B mixing rule when the fluid molecules arrived at near wall. The methane molecule diameter was obtained from the radial distribution function by using equilibrium MDS under the same initial conditions. The local viscosities across the adsorbed layer were obtained from the local velocity profile by using the Poiseuille flow method. The motion equation of the methane molecule was solved by the leapfrog method. The temperature of the simulation system was checked by Bhadauria's method, i.e., the system temperature was rectified by the velocities in the y- and z-directions. The flow velocity distributions across the channel height and the volume flow rates through the channel were also calculated from Zhang's closed-form explicit flow equations respectively for the adsorbed layer flow and the intermediate fluid flow. The results respectively obtained from full MDS and Zhang's multiscale flow equations were then compared.

Critical Size of Continuum Theory Applicability for Single-Phase Liquid Flow in Nanochannel

The Simulation of Liquid Flow in the Pore Network Model of Nanoporous Media

Extending the Classical Continuum Theory to Describe Water Flow Through Two-Dimensional Nanopores

Simulation of Water Flow in a Nanochannel with a Sudden Contraction or Expansion

Compressible liquid flow in nano- or micro-sized circular tubes considering wall–liquid Lifshitz–van der Waals interaction

Roughness Effect on Flow and Thermal Boundaries in Microchannel/nanochannel Flow Using Molecular Dynamics‐continuum Hybrid Simulation

Effects of Density on Flow in a Nano Channel Using a Molecular-Continuum Hybrid Method

Multi-scale study of liquid flow in micro/nanochannels: effects of surface wettability and topology

SOME FLOW AND THERMAL PHENOMENA AT MICRO/NANO SCALE

Quantification of bulk solution limits for liquid and interfacial transport in nanoconfinements

Wetting fluid behaviour with phase transition in geological nanopores: Liquid film, capillary condensation and evaporative flow

Molecular kinetic modelling of nanoscale slip flow using a continuum approach

Molecular dynamics of quantitative evaluation of confined fluid behavior in nanopores media and the influencing mechanism: Pore size and pore geometry

Liquid Flow in Surface-Nanostructured Channels Studied by Molecular Dynamics Simulation.

Molecular Dynamic Simulation of Nano-Sized Channel Flow

Atomistic-continuum Hybrid Simulations for Compressible Gas Flow in a Parallel Nanochannel

Size Effects on Droplet Displacing Process in Micropores by Multiscale Modeling

Evaporation-driven Liquid Flow Through Nanochannels

Structure and Transport of Confined Liquid in Nanochannels

Molecular dynamics simulation of liquid argon flow in a nanoscale channel

Comparisons between full molecular dynamics simulation and Zhang's multiscale scheme for nanochannel flows