Abstract:Modification schematic diagram of CF/PA6 composite. The mechanical properties of carbon fiber (CF) reinforced thermoplastic polymer composites are primarily governed by the interphase between CFs and matrix. However, the inherent inertness of CF surfaces combined with the high viscosity and processing temperatures of thermoplastic resin often result in relatively weak interfacial bonding. This study aims to enhance the interfacial adhesion of carbon fiber reinforced polyamide 6 composites to improve their mechanical properties. CFs were de‐sized and oxidized, followed by re‐sizing with silanized carbon nanotubes. Fracture morphology and composition analysis of the fibers were conducted, and the fibers were subsequently incorporated into composites for mechanical testing. Results revealed a 20.0% increase in tensile strength, a 25.11% increase in flexural strength, and a 24.88% increase in interlaminar shear strength for the resized‐carbon fiber reinforced polyamide 6 composites compared to the pristine‐carbon fiber reinforced polyamide composites. The cross‐sectional morphology of the modified composites exhibited a zig‐zag fracture pattern. Dynamic mechanical analysis indicated that the modified fibers required higher activation energy for the free movement of the polyamide 6 molecular chain. These findings suggest that surface treatment enhances the interfacial adhesive between CF and resin, thereby significantly improving the mechanical properties of carbon fiber reinforced polyamide 6 composites. Highlights An efficient and reliable carbon fiber surface treatment method is proposed. Surface modification improves surface chemical activity of carbon fibers. Composites show substantial improvements in mechanical properties. Interfacial performance enhancement mechanism of composite was revealed.

The Mechanical Properties of Surface Treated Uhmwpe Fibers and Tio2 Reinforced Pmma Composite

Mechanical Properties of Polymer Nanocomposites with Randomly Dispersed and Cross-Linked Two-Dimensional Diamond

The Mechanical Properties of Surface-Treated Poly-P-phenylenebenzobisoxazole Fiber-Reinforced PMMA Composite with TiO2

Improved Tribological Properties of Poly(methyl methacrylate) Based Composites by the Synergistic Effect of Incorporating Ultra-High Molecular Weight Polyethylene and Heat Treatment

Preparation and Properties of Three-dimensional Braided UHMWPE Fiber Reinforced PMMA Composites

Ultra-High Molecular Weight Polyethylene Fibers/Epoxy Composites: Effect of Fiber Treatment on Properties

Low-velocity Impact Behavior of UHMWPE Fabric/thermoplastic Laminates with Combined Surface Treatments of Polydopamine and Functionalized Carbon Nanotubes

An Investigation on Tribological Properties and Mechanical Properties of UHMWPE/polycrystalline Mullite Fiber

Characterization of Three‐dimensional Braided Polyethylene Fiber–pmma Composites and Influence of Fiber Surface Treatment

Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites

Effect of Wet Surface Treated Nano-Sio2 on Mechanical Properties of Polypropylene Composite

Enhancement of Modulus, Strength, and Toughness in Poly(methyl methacrylate)-Based Composites by the Incorporation of Poly(methyl methacrylate)-Functionalized Nanotubes

Fabrication and Characterization of PMMA/MWCNTs Composite Materials

Mechanical, thermal, and flammability properties of polyamide-6 reinforced with a combination of carbon nanotubes and titanium dioxide for under-the-hood applications

A Novel Surface Modification of Carbon Fiber for High-Performance Thermoplastic Polyurethane Composites

Toughness Enhancement of Poly(methyl methacrylate) (PMMA)/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Nanocomposites by Multiwall Carbon Nanotubes (MWNT)

The Study on the Microstructures and High Performances of Melt Blending Polyurethane/Multiwalled Carbon Nanotubes Composites

Influence of Surface-Modified TiO2 Nanoparticles on Fracture Behavior of Injection Molded Polypropylene

Tribological Properties of Self-Reinforced Ultra-High Molecular Weight Polyethylene Composites

Investigation on the mechanical, thermal and electrical properties of polyoxymethylene composites modified by thermoplastic polyurethane elastomer and carbon fiber

Influence of UHMWPE fiber and Ti6Al4V metal surface treatments on the low-velocity impact behavior of thermoplastic fiber metal laminates