Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. In this work, the thermal stability of wood flour (WF) was modified using a boric acid treatment. To further understand the impacts of incorporating various proportions of titanium dioxide (TiO2) nanoparticles loaded on polycarbonate (PC)/wood flour. The rheological, mechanical, thermal, electrical, and interfacial properties were studied. Various properties of the resultant PC/WF/TiO2 nanocomposites were then characterized. The viscosity of the nanocomposite was shown to decrease with shear rate and temperature. XRD investigation indicated that, by introducing TiO2 nanoparticles into PC/WF, the amorphous phase decreased, and the degree of crystallinity increased, as compared to bare PC/WF, from 65.78 to 42.29. In addition, the TGA profile showed that the nanocomposites have a higher resistance to thermal degradation than PC/WF alone. It was observed that the char residue resulting from the TGA of PC/WF/10%wt TiO2 increased to 5.69% compared to pure PC/WF (1.32%). It was found that an appropriate amount of TiO2 in PC/WF caused a significant increase in tensile strength, elongation at break, and on impact strength. These were attributed to an increase in the interface of the dispersed phase. The incorporation of nanoparticles enhanced the thermal conductivity of the nanocomposites, which was found to be higher when a TiO2 content of ∼3 wt% was used. The electrical conductivity of the PC/WF/TiO2 nanocomposite ( 3 wt% of TiO2, due to the aggregation of nanoparticles, TiO2 nanoclusters formed in the PC/WF composite. Therefore, the additional space so created for the movement of conduction ions at the interface may have resulted in increased ion mobility. This could be the one of explanations for the increased electrical conductivity associated with higher wt% of TiO2. Results showed that treating the PC/WF/TiO2 nanocomposites with boric acid decreased both the rate of heat release and the total heat release.

Mechanical, thermal, and flammability properties of polyamide-6 reinforced with a combination of carbon nanotubes and titanium dioxide for under-the-hood applications

Effect of long-length carbon nanotubes on yield, ultimate, dynamic mechanical, and thermal properties of polyamide-6 composites prepared by twin-screw extrusion

Thermal–oxidative Degradation and Accelerated Aging Behavior of Polyamide 6/epoxy Resin‐modified Montmorillonite Nanocomposites

The improved viscoelastic properties of long‐length carbon nanotubes reinforced polyamide‐6 composites

Investigation on the Multiwalled Carbon Nanotubes Reinforced Polyamide 6/polypropylene Composites

Multifunctional nanocomposites based on a polyamide 6/polyamide 12 blend and multi‐walled carbon nanotubes

Preparation and Properties of PA6/Epoxy-resin-modified Montmorillonite Nanocomposites

A study of mechanical behavior and morphology of carbon nanotube reinforced UHMWPE/Nylon 6 hybrid polymer nanocomposite fiber

Mechanical Properties and Nonisothermal Crystallization Kinetics of Polyamide 6/functionalized TiO2nanocomposites

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Enhancement of Modulus, Strength, and Toughness in Poly(methyl methacrylate)-Based Composites by the Incorporation of Poly(methyl methacrylate)-Functionalized Nanotubes

Exploring the mechanical, rheological, and thermal performance of self‐reinforced composites based on polyamides and multi‐walled carbon nanotubes

Studying the influence of the addition of nano-titanium dioxide on the rheological, mechanical, thermal, and electrical properties of polycarbonate/wood flour

Structure and Perpormance of Polyamide 6 Composites Reinforced by Glass Fiber Compounded with Nano-Sio2 or Canbon Nanotubes

Mechanical behavior of the polyamide 6.6 nanofiber and MWCNT‐reinforced hybrid nanocomposites

Melt rheological properties of nylon 6/multi-walled carbon nanotube composites

Structure and Performance of Polyamide 6/Halloysite Nanotubes Nanocomposites

Harnessing the thermo-mechanical properties and toughness of MWCNT/TiO2 hybrid epoxy nanocomposites

Study on high-strength and high-toughness PA6/POE-g-MAH/MWNTs ternary composites

The Structure and Properties of PA6/MMT Nanocomposites Prepared by Melt Compounding

In Situ Polymerization Approach to Multiwalled Carbon Nanotubes Reinforced Polyundecanoylamide Composites