Abstract:Piezoelectric energy harvesting from roadways, which converts ambient vibration energy of roads into electric energy, has a wide range of potential applications in intelligent transportation systems. On-site open-traffic tests revealed that energy harvested by piezoelectric energy harvester (PEH) units embedded in roadways is far less than the value in laboratories, which may be because the parameters of traffic flow load (frequency, distribution, wave shape, etc.) and the road structure are significantly different from the pre-established conditions in laboratories or even on-site tests with only one vehicle passing. To address this issue, an analytical model for piezoelectric energy harvesting from roadways under open-traffic conditions was proposed to examine the mechanical response of the road structure and the electrical performance of the stack PEH units embedded in the road. The influence of all parameters in the energy-harvesting system was then obtained with the scaling law method, revealing that the energy harvested by PEH units is determined by the energy coefficient, the system's intrinsic parameter, normalized parameters of roadways, and the normalized embedded position of PEH units. It is found that that the energy-harvesting system's intrinsic parameter should be approximately 0.8 to ensure maximum energy-harvesting efficiency. Meanwhile, the pavement with lower bending stiffness and higher linear density while the foundation with small stiffness and smaller damping coefficient would be more suitable for energy harvesting. Furthermore, the lateral embedded position of PEH units should be carefully chosen, since the units embedded in an optimal position can harvest three times more than that embedded in other positions. The concise criteria presented in this study will be used as a reference not only for material selection, dimension optimization, and embedded positions determination of PEH units but also for choosing of the optimal roadways to achieve maximum piezoelectric energy harvesting efficiency under open-traffic conditions.

A Preliminary Study on the Iot-Based Pavement Monitoring Platform Based on the Piezoelectric-Cantilever-Beam Powered Sensor

Piezoelectric Sensing Techniques in Structural Health Monitoring: A State-of-the-Art Review

Feasibility of Energy Harvesting from Vertical Pedestrian-Induced Vibrations of Footbridges for Smart Monitoring Applications.

The Optimal Design of a Piezoelectric Energy Harvester for Smart Pavements

Theoretical Assessment on Piezoelectric Energy Harvesting in Smart Self-powered Asphalt Pavements

Mechanical Energy Harvesting from Road Pavements under Vehicular Load Using Embedded Piezoelectric Elements

Piezoelectric Energy Harvesting from Roadways under Open-Traffic Conditions: Analysis and Optimization with Scaling Law Method

ePave: A Self-Powered Wireless Sensor for Smart and Autonomous Pavement

Development in Stacked-Array-Type Piezoelectric Energy Harvester in Asphalt Pavement

A Preliminary Study on the Highway Piezoelectric Power Supply System

Real-Time and Efficient Traffic Information Acquisition via Pavement Vibration IoT Monitoring System

Development of a Pavement-Embedded Piezoelectric Harvester in a Real Traffic Environment

Optimal Lateral Embedded Position of Piezoelectric Energy Harvesters under Various Traffic Conditions with Wheel-Path Distribution

Piezoelectric Energy Harvesting from Roadway Deformation under Various Traffic Flow Conditions

Development of a Novel Piezoelectric Sensing System for Pavement Dynamic Load Identification

IoT-enhanced Smart Road Infrastructure Systems for Comprehensive Real-Time Monitoring

Performance Analysis of Piezoelectric Energy Harvesting in Pavement: Laboratory Testing and Field Simulation

Experimental Investigation of Piezoelectric Energy Harvesters Applied in Concrete Pavement

A Distributed Pavement Monitoring System Based on Internet of Things

A Pavement Piezoelectric Energy Harvester for Small Input Displacements

Self-powered weigh-in-motion system combining vibration energy harvesting and self-sensing composite pavements