Abstract:Aiming at enhancing the electrochemical characteristic of RE-Mg-based composite, the partial substituting La with Ce experiment in the composites was conducted, and the surface modification treatment of the alloys was performed by mechanical coating Ni. By means of mechanical trituration, The La 10-x Ce x Mg 80 Ni 5 (x = 0–2) + y wt% Ni (y = 50–200) compound materials which have the structures of nanocrystalline and amorphous were synthesized. In order to make sense of the principle action of Ce and Ni elements in structural and electrochemical properties of the material, some deep research were carried out. According to the final results, the as-milled composites have the electrochemical hydrogen absorption and hydrogen desorption abilities at room temperature. Having no use for activation, the as-milled composites can reach the maximum discharge capacities when the first cycling was carried out. With the Ni value x changed from 50 to 200, the discharge capacity was varied from 70.5 mAh/g to 902.1 mAh/g; moreover, the capacity retention rate at 20th cycle (S 20 ) and high rate dischargeability (HRD) of the (x = 0) composite were heightened from 67.2 % to 82.3 %, from 50.6 % to 55.7 % respectively. The composites' (y = 100) discharge capacity has a maximum value 118.5 mAh/g when the Ce value x is 1. The capacity retention rate (S 20 ) is enhanced from 53.3 % to 68.5 % by lifting Ce content from x = 0 to x = 2. what's more, the high-rate discharge ability (HRD), the electrochemical impedance spectrum (EIS), potentiodynamic polarization curves, and potential-step measurements all intimate that substituting La with Ce clearly promotes the composites' electrochemical kinetic properties, but maximum values emerge only when the x value is 1.

CeLa Enhanced Corrosion Resistance of Al-Cu-Mn-Mg-Fe Alloy for Lithium Battery Shell

Effect of Ce Addition on the Microstructure and Properties of Al-Cu-Mn-Mg-Fe Lithium Battery Shell Alloy

Effect of CeLa addition on the mechanical properties of Al–Cu–Mn–Mg–Fe alloy

Effect of Ce Addition on the Mechanical and Electrochemical Properties of A Lithium Battery Shell Alloy

Effect of La Addition on Microstructure and Properties of Al-0.2Fe-0.06Cu Alloy

The Effect of Rare Earths Additions on the Microstructure and the Corrosion Behavior of Sn-0.7Cu-0.075Al Solder Alloy.

Effect of La Addition on the Microstructure and Properties of Al-Fe-Mn Alloys for Lithium Battery Current Collectors

Improved Stress-Corrosion-cracking Resistance of Mg-3Al-3Ca Alloy Enabled by Coupled Addition of Y and Nd

Regulating Cathode-Electrolyte Interphase by Confining Functional Aluminum Compound within Ni-Rich Cathodes

Effects of Surface Modification on the Electrode Behavior of Amorphous CeMg12 Alloys

Corrosion resistance of anodically oxidized LY12 aluminum alloy after modification with cerium nitrate and silane

Corrosion Behaviour of AM60 Magnesium Alloys Containing Ce or La under Thin Electrolyte Layers. Part 1: Microstructural Characterization and Electrochemical Behaviour

Effect of Ce replacing La on the electrochemical performance of amorphous grain boundaries Mg-Ni-based materials

Effects of Adding Cerium to Lithium on Properties of Lithium Anode

Effect of cerium addition on electrochemical performances of Pb-Ca alloy in H2SO4

Tensile Properties and Corrosion Resistance of Al-xFe-La Alloys for Aluminium Current Collector of Lithium-Ion Batteries

Effect of Ce on the Microstructure and Corrosion Resistance of Al-5Mg-3Zn-1Cu Alloy

Effect of Adding Magnesium to Lithium on the Performance of Discharge and Hydrogen Evolution of the Lithium Anode

Corrosion Behaviors of Mg-14Li-1Al-0.1Ce Alloy in NaCl Solutions

Al-1.5Fe-xLa Alloys for Lithium-Ion Battery Package

EFFECT OF CERIUM AND LANTHANUM ALLOYING ON MICROSTRUCTURE AND CORROSION BEHAVIOR OF AZ91 MAGNESIUM ALLOY