Abstract:Magnetic bearings (MBs) enable the rotor to run at high speed without lubrication due to no mechanical contact. However, the inherent hysteresis of ferromagnetic materials affects the support characteristics, reducing the design performance and stability margin of MBs, especially for axial MBs using materials with high coercive force. To analyze and compensate for the hysteresis effect on the electromagnetic force in axial MBs, an efficient method is proposed in this paper. Firstly, the hysteresis properties of the ferromagnetic materials are simulated by the Preisach model, and the B-H relationships under any external magnetic field can be determined. Taking into account the non-ideal factors such as hysteresis and saturation effects, the nonlinear magnetic circuit model of the axial MBs is established. The magnetic flux density working point under different control currents and eccentric displacements can be determined through iterative calculation, and then the air gap flux density distribution and electromagnetic force of the axial MBs are calculated. On this basis, the adverse effects of hysteresis on the bearing capacity and system stability of axial MBs are analyzed. A compensation algorithm is designed based on the inverse model to reduce the hysteresis effect. The inverse model is approximated modeled by the Lissajous curve. Finally, the proposed analysis and control methods are verified by the finite element method (FEM) or experiments. The results show that the proposed analysis method is capable of accomplishing good accuracy and requires less computation time than FEM, it can be applied to arbitrary current variation processes. In addition, the phase lag of the system is effectively improved with the compensation algorithm.

An Improved Magnetic Circuit Model of a 3-DOF Magnetic Bearing Considering Leakage and Cross-Coupling Effects

Investigation of Cross-Coupling Effect of a 3-DOF Magnetic Bearing Using Magnetic Circuit Method

Modeling and Design of a 3-DOF Magnetic Bearing with Toroidal Radial Control Coils

Magnetic Circuit Modeling of Dual-Armature Flux-Switching Permanent Magnet Machine

Advanced Computational-Time Reduction Technology of Nonlinear Fourier-Based and Magnetic Circuit Hybrid Model

An Accurate No-Load Analytical Model of Flat Linear Permanent Magnet Synchronous Machine Accounting for End Effects

Modeling and Design of Permanent Magnet Biased Radial-Axial Magnetic Bearing by Extended Circuit Theory

A Nonlinear 3-D Hybrid Model for Surface-Mounted Permanent Magnet Machines Considering End Effect

Stiffness Analysis And Levitation Force Control Of Active Magnetic Bearing For A Partially-Self-Bearing Flywheel System

Nonlinear Analytical Model of Heteropolar Radial Magnetic Bearing

Analysis and Compensation of Hysteresis Effect on Electromagnetic Force in Axial Magnetic Bearings

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

Study on Inverter-fed Three-pole Active Magnetic Bearing

The Integrated Mathematic Model of a Permanent Magnet Type Bearingless Motor

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

An Enhanced Dynamic Simulation Model of a Hybrid Magnetic Bearing Taking Account of the Sensor Noise

Magnetic Field Analysis Using an Analytical Method in a Radial Magnetic Bearing

Magnetic field analysis of a hybrid excitation multi-degree-of-freedom spherical motor

Cooperative Rotor Position Estimation of Active Magnetic Bearings with Unsaturated Magnetic Bias

Magnetic Equivalent Circuit Model for a Two Degree-of-Freedom Rotary-Linear Machine with Transverse Flux Structure

Dynamic Coefficients of Radial Magnetic Bearings and Coupling of Magnetic Force and Magnetic Moment: A Simulation Study