Abstract:This study aims to propose a model for dynamically simulating the online-refueling process in pebble-bed reactor (PBR) using MCNPX. PBR has a special feature of online-refueling which can greatly reduce the outage time and enable a higher burnup in spent fuel. However, this feature also results in the dynamical fuel movements which may significantly increase the difficulty and the computational time in computer simulation. Therefore, an appropriate model is necessary to be proposed to simulate the burnup characteristics of online-refueling and to reduce the computational time simultaneously. All the calculations in this study were performed using MCNPX 2.7.0 with the ENDF/B-VII continuous energy nuclear data library. The PBR model was built according to the core design of HTR-10 but adopted some reasonable assumptions. The refueling process was emulated by utilizing the fuel loading scenario of the once through then out (OTTO) in combination with the layer-mixed-shell fuel movement. Additionally, the layer-mixed-shell fuel movement considered the concept of fuel channels, where the fuel pebbles only move in the same fuel channel, such that the burnup characteristics of fuel pebbles in both radial and axial direction can be identified separately. The core was divided into 9 fuel zones with a fixed volume and 3 fuel channels with a variety of fuel zones. Furthermore, the number of fuel zones in each fuel channel was determined based on the relative residence time of fuel pebbles in the core. The results revealed that the core can achieve an equilibrium fuel cycle after refueling several times, and after that all the core characteristics can nearly maintain unchanged between different cycles. Although the refueling process was modeled based on the OTTO fuel loading scenario instead of the multi-pass one, the discharged burnup can still reach the target burnup of the spent fuel for HTR-10, i.e. 72 GWd/tHM. In addition, the average discharged burnup under the equilibrium fuel cycle is approximate to 80 GWd/tHM, which also coincides the design value of the spent fuel for HTR-10. Therefore, the layer-mixed-shell movement model can consider the fuel movements in either radial or axial directions simultaneously and enable a more accurate prediction to the real refueling process of HTR-10 than our previous studies.

Numerical Solutions for the Kinematic Model of Pebble Flow Velocity Profiles and Its Applications in Pebble-Bed Nuclear Reactor

Three-dimensional Numerical Simulation of Quasi-Static Pebble Flow

Analysis of the pebble burnup profile in a pebble-bed nuclear reactor

Some Movement Mechanisms and Characteristics in Pebble Bed Reactor

Analysis of Granular Flow in a Pebble-Bed Nuclear Reactor

Review Of Mathematical Models For Pebble Dynamics

Experimental Research and Dem Simulations on Stagnant Region in Pebble Bed Reactor

METHODOLOGY TO CONSTRUCT BURNUP PROFILE OF FUEL PEBBLES IN PBR

Numerical Methods and Simulation for Pebble Flows

Numerical Simulation on Pebble Dynamics of Two-dimensional Two-region Pebble-bed Reactor Using Phenomenological Method

Computational Fluid Dynamics Investigation of Thermal-Hydraulic Characteristics in a Simplified Pebbled Bed Modular Reactor Core Using Different Arrangements of Fuel Elements

Direct Numerical Simulation of the Flow Through a Randomly Packed Pebble Bed

Neutronics Analysis on High-Temperature Gas-Cooled Pebble Bed Reactors by Coupling Monte Carlo Method and Discrete Element Method

Experimental and Numerical Study of the Movement Mechanism and Characteristics of the Quasi-Static Pebble Flow

Numerical Study of Pebble Recirculation in a Two-Dimensional Pebble Bed of Stationary Atmosphere Using LB-IB-DEM Coupled Method

Research on Fuel Pebble Modeling Methods Comparison and Eigenvalue Analysis of the Running-in Phase of HTR-PM

A Thermal Resistance Model of Conduction–thermal Radiation Heat Transfer in Pebble-Bed Nuclear Reactors

CFD Investigation of Thermal-Hydraulic Characteristics in a PBR Core Using Different Contact Treatments Between Pebbles

A review of pebble flow study for pebble bed high temperature gas-cooled reactor

Burnup computations of online-refueling process for pebble-bed reactors using layer-mixed-shell fuel movement model

Experimental Study of Flow Field Characteristics on Bed Configurations in the Pebble Bed Reactor