Abstract:Co-fluidization of two types of particles is commonly encountered in the chemical and energy industry. A deep understanding of segregation between them is of great significance. The accurate measurement of segregation for any gas velocity ( U g ) from the experimental perspective is the first and critical step. The key lies in acquiring the stable fluidization state that could represent the given U g . Two distinct methods were thoroughly compared in this work. The first was decreasing gas flow quickly from high values to the target U g and keeping fluidization therein for sufficient time. The second was reducing gas flow very slowly from high values to the target U g . The apparent minimum fluidization velocity of the binary particles was denoted as U mfa whereas the minimum fluidization velocities of flotsam and jetsam were represented by U mfF and U mfJ . When U g was greater than U mfJ , the corresponding stable fluidization state could be easily reached via either method. Yet, it could only be acquired via the second method for U g ∈( U mfa , U mfJ ). For U g ∈( U mfF , U mfa ), neither method was feasible. The difficulty in acquiring the stable fluidization state for U g < U mfJ resulted eventually from the internal friction among the particles, due to which the de-fluidization of some jetsam particles could deprive the capability of many other particles to move and hinder their migration to the stable equilibrium positions. The macroscopic state of binary particles at U g ∈( U mfF , U mfJ ) was further found to depend also on the path taken to reach it; binary particles therein could have different equilibrium states (being polymorphic); the final fluidization state acquired via the first method was demonstrated to be metastable. The stable fluidization state of binary particles at U g ∈( U mfF , U mfa ) was too complicated to describe; convincing methods for acquiring it and determining the true extent of segregation are of urgent need; the second method was still effective in approaching the so-called stable fluidization state.

A New Quantitative Measurement Method for Mixing and Segregation of Binary-Mixture Fluidized Bed by Capacitance Probe

Quantitative Measurement of Hydrodynamics in a Binary Fluidized Bed by Capacitance Probes

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Instantaneous mixing characteristics of binary mixtures differing in density in a gas‒solid fluidised bed

Online Measurement of Particle Charge Density in A Gas-Solid Bubbling Fluidized Bed Through Electrostatic and Pressure Sensing

Measurement of Gas-Liquid Two-Phase Flow in Micro-Pipes by a Capacitance Sensor.

Mass Transfer Characterization for Hydrocarbon Liquid–particle Collision Based on Sensitive Tracing of Fluorescent Probe

Monitoring of Particle Motions in Gas-Solid Fluidized Beds by Electrostatic Sensors

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

Particle-Scale Simulation of Solid Mixing Characteristics of Binary Particles in a Bubbling Fluidized Bed

Numerical simulation of local and global mixing/segregation characteristics in a gas–solid fluidized bed

Mixing/segregation characteristics and bubble behaviors of density-segregated binary particles in a pressurized fluidized bed

Segregation and mixing of binary mixtures of spherical particles in a bubbling fluidized bed

A Numerical Investigation on Segregation in Gas-Fluidized Beds of Short, Flexible Fibers

Comparing two methods of acquiring stable fluidization state for binary particles during measurement of segregation

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Research on particle mixing in a fluidized bed

Computational Fluid Dynamics-Discrete Element Method Investigation of Solid Mixing Characteristics in an Internally Circulating Fluidized Bed

Systematic analysis of mixing and segregation patterns of binary mixtures in fluidised beds for multi-functional processes