Abstract:Purpose This paper aims to present the design development and measurement of two aerodynamic slotted X-bands back-to-back planer substrate-integrated rectangular waveguide (SIRWG/SIW) to Microstrip (MS) line transition for satellite and RADAR applications. It facilitates the realization of nonplanar (waveguide-based) circuits into planar form for easy integration with other planar (microstrip) devices, circuits and systems. This paper describes the design of a SIW to microstrip transition. The transition is broadband covering the frequency range of 8–12 GHz. The design and interconnection of microwave components like filters, power dividers, resonators, satellite dishes, sensors, transmitters and transponders are further aided by these transitions. A common planar interconnect is designed with better reflection coefficient/return loss (RL) (S 11 /S 22 ≤ 10 dB), transmission coefficient/insertion loss (IL) (S 12 /S 21 : 0–3.0 dB) and ultra-wideband bandwidth on low profile FR-4 substrate for X-band and Ku-band functioning to interconnect modern era MIC/MMIC circuits, components and devices. Design/methodology/approach Two series of metal via (6 via/row) have been used so that all surface current and electric field vectors are confined within the metallic via-wall in SIW length. Introduced aerodynamic slots in tapered portions achieve excellent impedance matching and tapered junctions with SIW are mitered for fine tuning to achieve minimum reflections and improved transmissions at X-band center frequency. Findings Using this method, the measured IL and RLs are found in concord with simulated results in full X-band (8.22–12.4 GHz). RLC T-equivalent and p-equivalent electrical circuits of the proposed design are presented at the end. Practical implications The measurement of the prototype has been carried out by an available low-cost X-band microwave bench and with a Keysight E4416A power meter in the microwave laboratory. Originality/value The transition is fabricated on FR-4 substrate with compact size 14 mm × 21.35 mm × 1.6 mm and hence economical with IL lie within limits 0.6–1 dB and RL is lower than −10 dB in bandwidth 7.05–17.10 GHz. Because of such outstanding fractional bandwidth (FBW: 100.5%), the transition could also be useful for Ku-band with IL close to 1.6 dB.

Investigations on the Rectangular Waveguide to Siw Transition for Terahertz Applications

Improved circuit model for coplanar-waveguide to microstrip-line transition on silicon substrate

A Compact SIW Butler Matrix with Straight Delay Lines at 60 GHz

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

A New Type of Periodically Loaded Half-Mode Substrate Integrated Waveguide and Its Applications

3D Heterogenous Integrated Wideband Switchable Bandpass Filter Bank for Millimeter Wave Applications

Ka Band Transition Between Rectangular Waveguide and Substrate Integrated Waveguide

Wafer-Scale Silicon Microfabrication Technology Toward Realization of Low-Cost Sub-THz Waveguide Devices

A Novel Wideband Transition from LTCC Laminated Waveguide to Air-Filled Rectangular Waveguide for W-band Applications

A Broadband Low-Loss SICL to Ridge Waveguide Transition for Millimeter-Wave Applications

Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

SiN-SOI Multilayer Platform for Prospective Applications at 2 Μm

Air-filled SIW technology for mass-manufacturable and energy-efficient terahertz systems

Silicon Membrane-Based Waveguide-to-Superconducting CPW Transitions at 2 Mm Band

Integrated Broadband Filter with Sharp Transition Edges Based on SiN and SiON Composite Waveguide Coupler

Waveguide-to-planar circuit transition for millimetre-wave detectors

A 53–125 GHz chip to double‐ridge rectangular waveguide transition

Aerodynamic slotted SIW-to-MS line transition using mitered end taper for satellite and RADAR communications

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Design of SIW Filter Transition Structure Based on Quarter-Wavelength Impedance Matching

Broadband ridge waveguide to rectangular waveguide transition design in D‐band