Abstract:In the power scaling of monolithic fiber lasers, the fiber nonlinear effects and transverse mode instability are main limitations. The tapered gain fiber has a longitudinally varying mode area, which has the advantage of mitigating fiber nonlinear effects. However, the transverse mode instability (TMI) was seldom reported in the tapered fiber lasers at high average power levels. In this work, we have constructed a monolithic tapered ytterbium-doped fiber laser oscillator and investigated the laser oscillator performance with respective 976 nm and 915 nm pump, especially on the aspects of the TMI. The double cladding tapered ytterbium-doped fiber has a narrow end of similar to 20/400 mu m and a wide end of similar to 30/600 mu m. Fiber Bragg gratings (FBG) are respectively inscribed on double cladding fibers with core/inner cladding diameter of 20/400 mu m and 30/400 mu m to match with the narrow and wide end of the tapered ytterbium-doped fiber. When 915 nm pump is employed, the TMI occurs at the output power of similar to 1350 W. The output power is further scaled to a maximum of 1720 W. The M-2 factor of the output laser is similar to 2.1 and the full width at half maximum (FWHM) of the signal laser is similar to 3.6 nm. To the best of our knowledge, this is the highest average power for the tapered ytterbium-doped fiber lasers. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

307 W High-Power 1018 Nm Monolithic Tandem Pump Fiber Source with Effective Thermal Management

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

A 1150-W 1018-Nm Fiber Laser Bidirectional Pumped by Wavelength-Stabilized Laser Diodes

High-power 1018 nm ytterbium-doped fiber laser and its application in tandem pump.

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

A High-Power All-Fiberized Yb-doped Laser Directly Pumped by a Laser Diode Emitting at Long Wavelength

A 2.14 Kw Tandem Pumped Fiber Amplifier

20 Kw Monolithic Fiber Amplifier with Directly Dual-Wavelength Laser Diodes Counter Pumping

1.1-Kw Ytterbium Monolithic Fiber Laser with Assembled End-Pump Scheme to Couple High Brightness Single Emitters

Diode-Pumped 1178-Nm High-Power Yb-Doped Fiber Laser Operating at 125 $^{\circ}$ C

10.6 Kw High-Brightness Cascade-End-pumped Monolithic Fiber Lasers Directly Pumped by Laser Diodes in Step-Index Large Mode Area Double Cladding Fiber

Hybrid-structure 1018-nm monolithic single-mode fiber laser producing high power and high efficiency

3.1 kW monolithic MOPA configuration fibre laser bidirectionally pumped by non-wavelength-stabilized laser diodes

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

A 980nm Yb-doped Single-Mode Fiber Laser Pumped by a 946nm Q-switched Nd:YAG Laser

High Power 1018 Nm Ytterbium Doped Fiber Laser with an Output Power of 309 W

High-Power Yb-Doped and All Fiber-Based Nanosecond MOPA Laser

High power monolithic tapered ytterbium-doped fiber laser oscillator.

1150-Nm Yb-Doped Fiber Laser Pumped Directly by Laser-Diode with an Output Power of 52 W