Abstract:Steel slags are solid residual materials formed as by-products throughout the process of steel production within the steelmaking industry. These wastes have good physical properties such as high stiffness and friction angle for use as road fill materials or in geotechnical applications. However, the presence of heavy metals and high alkalinity levels constitute significant environmental hazards and set limitations on using slags in engineering applications. While there have been investigations into the mechanical characteristics of steel slags, research on assessing potential harm when utilizing the materials in engineering applications is rare. This study examines the mitigation methods to address the environmental problems associated with steel slags. To do this, two different steel slags with different production techniques were treated with soils of different properties such as fine and coarse sand, bentonite, kaolin, and natural clay. The pH and electrical conductivity (EC) values of pure steel slags were determined using the water leach test (WLT). Variations in pH and EC values of steel slags subjected to treatment were evaluated through both WLT and sequential water leach (SWLT) tests. As a result, the high strength, stiffness, and drainage capability of EAF and LS steel slags make these materials suitable for road filling. This is further backed by their soaked and unsoaked CBR values. During the water leach tests, notable decreases in pH were observed with a 60% natural clay (NC) solution, resulting in a decrease of 1.2 and 0.7 in EAF and LS, respectively. The addition of sand had a negligible impact on pH due to its inert characteristics. Moreover, in sequential water leach tests, the most significant decrease in pH was observed with NC (with a reduction of 2.0 points for EAF and 0.9 points for LS) through enhanced ion exchange and extended periods of dilution and buffering. Also, the use of NC resulted in substantial decreases in EC for EAF and LS, with reductions of 77% and 81%, respectively. Moreover, heavy metal concentrations in leachate waters from pure steel slags have been detected, and the effect of treatment on aluminum and iron concentrations has been determined. The results indicate that the use of natural soil significantly drops the pH and lowers the trace metal concentrations within the leachate.

Mechanical Characterizations of Oxidizing Steel Slag Soil and Application

Laboratory Evaluation On The Performance Of Porous Asphalt Mixture With Steel Slag For Seasonal Frozen Regions

Research application of performance of steel slag-aggregated porous cement concrete

The mechanical strength, microstructure, and diffusivity of steel slag reinforced loess soil system

Engineering properties optimization of dispersive soil by calcium silicate waste-The role of steel-making slag

Use of steel slag to improve the mechanical properties of subgrades in clayey soils

Study on the Performance of Steel Slag and Its Asphalt Mixture with Oxalic Acid and Water Erosion

Experimental investigation of basic oxygen furnace slag used as aggregate in asphalt mixture

Study on Road Performance of Cement Fly Ash Stabilized Steel Slag-Concrete Recycled Macadam

Application of electric arc furnace slag for stabilisation of different tropical soils

Experimental Study on Water Stability of Steel Slag Stabilized Soil

Modeling the application of steel slag in stabilizing expansive soil

Features of Processes for Preparation and Performance of Foamed Lightweight Soil with Steel Slag Micronized Powder and Granulated Blast Furnace Slag

Utilization of Natural Soils as a Remediation Method for Electric Arc Furnace and Ladle Slags

Comparative Analysis of Steel Slag Characteristics and Treatment Process

Steel Slag/Precarbonated Steel Slag as a Partial Substitute for Portland Cement: Effect on the Mechanical Properties and Microstructure of Stabilized Soils

Study of Steel Slag Eroded by Oxalic Acid and Recovery of Leachate

Investigation of Permanent Deformation Behavior of Steel Slag Asphalt Mixture under Indoor Simulation

Application of Steel Slag in Road Semi-Rigid Subgrade and its Volume Stability Modification Progress Study

Mechanical, Physico-Chemical and Morphological Characterization of Energy Optimised Furnace (EOF) Steel Slag as Coarse Aggregate in Concrete

Study on pavement performance of steel slag asphalt mixture based on surface treatment