Abstract:The ability to model the cyclic behavior of low yield point steel accurately is essential for its application to seismic design. In this study, uniaxial tests of monotonic and strain controlled cyclic loading are conducted to investigate the mechanical properties of the low yield point steel BLY160. As observed in the test, work-hardening is an important hysteretic characteristic, which significantly influences the energy dissipation capacity of the steel. However, the cyclic softening in both stiffness and stress evolve as the plastic strain accumulates, which is manifested in the decrease of both the stress amplitude and the elastic domain of the stress–strain hysteresis loops. This change in the shape of the cyclic loops is called the “flattening effect” in this paper. To describe the cyclic hardening and softening effect by using one unified set of material parameters, a more sophisticated model based on the concept of internal variables is proposed as an extension of the combined isotropic-kinematic hardening model. The novel idea of a “transformation zone” with the introduction of an additional internal variable is proposed to synchronize the updates of isotropic and kinematic hardening such that the simultaneous change in the stress amplitude and the elastic region can be reproduced. Note that the cyclic softening develops in three stages: incubation, growth and the stabilization period. The logistic function, which presents a curve with an “S” shape, is first used to trace the evolution of the softening. Finally, the model parameters are identified by the test data, and the accuracy of the proposed model is verified by comparing the simulated performance and the experimental response under different loading histories. The results demonstrate that the extended model can elaborately describe the evolutional processes of cyclic hardening and softening by incorporating characteristics, such as the nonlinear transient behavior from elastic to plastic status, early yield under reversed loading and strain history dependence.

System Ringing in Impact Test Triggered by Upper-and-lower Yield Points of Materials

Fatigue hardening/softening behaviour investigated through Vickers microhardness measurement during high-cycle fatigue

Depth-Sensing Indentation-Based Studies of Surface Mechanical Behavior and Fatigue Damage Evolution of an Austenitic Stainless Steel Subjected to Cyclic Straining

Instrumented indentation measurements of residual stresses around a crack tip under single tensile overloads

Loading Measurement for Intermediate Strain Rate Material Test Based on Dynamic Oscillation

Design and Verification of a Strain Gauge Based Load Sensor for Medium-Speed Dynamic Tests with a Hydraulic Test Machine

Cyclic Hardening and Softening Behavior of the Low Yield Point Steel BLY160: Experimental Response and Constitutive Modeling

Theoretical and Experimental Investigation on the Magnetomechanical Effect of Steel Bars Subjected to Cyclic Load

Ratcheting assessment of low yield point steel BLY160: Experimental analysis and constitutive modelling

Qualification of Austenitic Stainless Steels for the Development of Load-Sensitive Material Sensors

Low Cycle Fatigue Property and Fracture Behavior of Low Yield Point Steels

Mechanical performance of low-yield-point steel LYP225 under cyclic loading

Dynamic Process of Ring Systems As Energy Absorber Subjected to Lateral Impact Loading

Dynamic Testing of Materials with the Rotating Disk Indirect Bar-Bar Tensile Impact Apparatus

Influence of Loading System Stiffness on Post-peak Stress–Strain Curve of Stable Rock Failures

Analysis of the Influence of Contact Stress on the Fatigue of AD180 High-Carbon Semi-Steel Roll

Hysteresis behavior of EQ56 high strength steel: Experimental tests and FE simulation

Fatigue Deformation and Damage Characteristics of Bolting System under Stress-Controlled Cyclic Pullout

Constitutive Model for Full-Range Cyclic Behavior of High Strength Steels Without Yield Plateau

Dynamic Mechanical Behavior at Elevated Temperatures and High Strain Rates of Low Yield Point Steels

Cyclic softening behavior of structural steel with strain range dependence