Abstract:Purpose - The purpose of this paper is to investigate the tribological properties Of MoS2 nano-sized hollow spheres in liquid paraffin (LP) and the corresponding action mechanism. Morever, its feasibity of industrial application as an oil additive in the industrial lubrication field is also explored.Design/methodology/approach - The tribological properties Of MoS2 nano-sized hollow spheres (NH-MoS2) modified by Cyanex 301(di-(2,4,4trim ethyl pentyl) dithiophosphinic acid) with size of 200 similar to 300nm in LP are studied and compared with those of the commercial colloidal MoS2 (CC-MoS2) on a four-ball tester and an Optimol SRV Oscillating friction and wear tester in a ball-on disk configuration. The worn surfaces of the lower flat disc are examined with a scanning electron microscopy and an X-ray photoelectron spectroscopy, respectively.Findings - Results show that NH-MoS2 is a better extreme-pressure additive and anti-wear (AW) and friction-reducing additive in LP than CC-MoS72. Under the optimum concentration of 0.5 per cent for both NH-MoS2 and CC-MoS2 and the load of 400 N, the friction coefficient of NH-MoS2 + LP and CC-MoS2 + LP decreases about 43.8 and 6.3 per cent, and the wear volume loss decreases about 60.3 and 12.0 per cent compared with the pure LP. The boundary lubrication mechanism for NH-MoS2 + LP can be deduced as the effective chemical adsorption protective film formed by the long chain alkyls R and active elements (S and P) in the modification layer and tribochemical reaction film containing the tribochemical products of the additive. Moreover, sliding and rolling frictions co-exist in NH-MoS2 + LP, doing contributions to the good tribological properties as well.Originality/value - In this paper, the Cyanex 301-modified MoS2 nano-sized hollow spheres with diameter of 200 similar to 300 nm are firstly added into LP to investigate its tribological properties. The excellent AW and friction-reducing properties indicate that this MoS2 hollow spheres product is a good oil additive, and the fundamental data presented here will be useful for its further industrial application in the future.

MoS2 hollow microspheres used as a green lubricating additive for liquid paraffin

Facile Synthesis of Molybdenum Disulfide Micro-Spheres and the Tribological Properties in Liquid Paraffin

Study on the tribological properties of surfactant-modified MoS2 micrometer spheres as an additive in liquid paraffin

The Synthesis of MoS2 Particles with Different Morphologies for Tribological Applications

Friction and Wear Properties of Cyanex 302-Modified MoS2 Micro-Sized Spheres as Additive in Liquid Paraffin

Tribological Properties Of Cyanex 301-Modified Mos2 Nano-Sized Hollow Spheres In Liquid Paraffin

Hydrothermal Synthesis of Mos2 and Its Lubricating Properties

A Study on Friction and Wear Properties of Surface-modified MoS2 Micro-spheres in Liquid Paraffin

The Application of Nano-MoS2 Quantum Dots as Liquid Lubricant Additive for Tribological Behavior Improvement

Preparation and tribological behaviors of magnesium silicate hydroxide-MoS2 nanoparticles as lubricant additive

One-step synthesis of carbon sphere@ 1 T-MoS2 towards superior antiwear and lubricity

Tribological Properties of Molybdenum Disulphide Nanoparticles in Soybean Oil

Controllable fabrication of magnesium silicate hydroxide reinforced MoS2 hybrid nanomaterials as effective lubricant additives in PAO

Study on the Performance of Different Crystal Forms Nano MoS2 as Lubricant Additives in Reducing Wear and Friction

High-efficiency Preparation of Oil-Dispersible MoS2 Nanosheets with Superior Anti-Wear Property in Ultralow Concentration

Tribological performances of MoS 2 /C 60 nanocomposite as lubricating additive in dioctyl sebacate

Lubricating properties of Cyanex 302-modified MoS2 microspheres in base oil 500SN

Preparation of Flaky Nano-MoS2 and Its Anti-friction and Anti-wear Performance in Oil

Investigation of the tribological properties of surfactant-modified MoS2 microsized spheres in base oil 500 SN

Hierarchical Hollow SiO2@TiO2 Sphere Structure for Enhancing the Lubrication and Photo-Catalytic Degradation of Liquid Paraffin

Alkylamine-Grafted Molybdenum Disulfide Nanosheets for Enhanced Dispersion Stability and Lubricity Properties