Abstract:In pressurized water reactor accident scenarios, the injection of water from the emergency core cooling system (ECCS) (ECC injection) might induce a pressurized thermal shock (PTS), affecting the reactor pressure vessel (RPV) integrity. Therefore, PTS is a vital research issue in reactor safety, and its analysis is essential for evaluating the integrity of RPVs, which determines the reactor life. The PTS analysis comprises a coupled analysis between thermal–hydraulic and structural analyses. The thermal–hydraulic approach is particularly crucial, and reliable computational fluid dynamic (CFD) simulations should play a vital role in the future because predicting the temperature gradient of the RPV wall requires data on the transient temperature distribution of the downcomer (DC). Since one-dimensional codes cannot predict the complex three-dimensional flow features during ECC injection, PTS is one reactor safety issue where CFD simulation can benefit from complement evaluations with thermal–hydraulic system analysis codes. This study reviewed from the viewpoint of the turbulence models most affecting PTS analysis based on papers published since 2010 on single- and two-phase flow CFD simulation for the experiment on PTS performed in the Rossendorf coolant mixing model (ROCOM), transient two-phase flow (TOPFLOW), upper plenum test facility (UPTF), and large-scale test facility (LSTF). The results revealed that in single-phase flow CFD simulation, where knowledge and experience are sufficient, various turbulence models have been considered, and many analyses using large eddy simulation (LES) have been reported. For two-phase flow analysis of air–water conditions, interface capturing/tracking methods were used in addition to two-fluid models. The standard k – ε and shear stress transport (SST) k – ω models were still in the validated phase, and various turbulence models have yet to be fully validated. In the two-phase flow analysis of steam–water conditions, many studies have used two-fluid models and Reynolds-averaged Navier-Stoke (RANS), and NEPTUNE_CFD, in particular, has been reported to show excellent prediction performance based on years of accumulated validation.

Thermal Hydraulic and Stress Coupling Analysis for AP1000 Pressurized Thermal Shock (PTS) Study under SBLOCA Scenario

A Preliminary Study on Transient States of Temperature in AP1000 RPV DVI-Nozzle under PTS

Thermal-stress modeling of AP1000 reactor pressure vessel due to transient pressurized thermal shock

Thermal Hydraulic Phenomena Related to Small Break LOCAs in AP1000

Research on Thermal Hydraulic Behavior of Small-Break LOCAs in AP1000

Multiscale Thermal Hydraulic Study under the Inadvertent Safety Injection System Operation Scenario of Typical Pressurized Water Reactor

Large Thermal Gradients on Structural Integrity of a Reactor Pressure Vessel Subjected to Pressurized Thermal Shocks

Simulation and analysis on 10-in. cold leg small break LOCA for AP1000

Analysis of AP1000 Containment Passive Cooling System During a Loss-of-coolant Accident

Analysis of PWR RPV Lower Head SBLOCA Scenarios with the Failure of High-Pressure Injection System Using MAAP5

Numerical Study on the Thermal Stratification Characteristics of AP1000 Pressurizer Surge Line

The Ap1000 Lbloca Analysis Using Scdap/Relap5

CFD simulation on the transient process of coolant mixing phenomenon in reactor pressure vessel

ADS-IRWST Transient Evaluation Model for AP1000 SBLOCA Analysis

Analytical Studies of Long-Term IRWST Injection Core Cooling under Small Break LOCA in Passive Safety PWR

Analysis of Safety Margin of In-Vessel Retention for AP1000

Analysis of Cold Leg Small Break LOCA for AP1000

CFD Applications to Pressurized Thermal Shock-Related Phenomena

The SCDAP/RELAP5 3.2 model of AP1000 on SBLOCA

Three-dimensional study on the hydraulic characteristics under the steam generator (SG) tube plugging operations for AP1000

Numerical Simulation of AP1000 LBLOCA with SCDAP/RELAP 4.0 Code