Abstract:Metal/composite hybrid structures, which combine low-density composites with low-cost metallic materials, exhibit considerable potential to provide cost-effective energy-absorbing devices for automotive applications. This study aimed to explore crashworthiness characteristics of aluminum/carbon fiber reinforced plastic (CFRP) hybrid tubes, experimentally and numerically, subjected to three different loading angles by comparing with the aluminum alone and CFRP alone tubes, in which the deformation patterns and several key indicators related to the crashworthiness of these structures were assessed. The experiments revealed that the CFRP tube has the highest SEA under the axial (37.82 J/g) and 15° loading (30.03 J/g) angles of all the configurations concerned; while the hybrid tube showed the greatest energy absorption. It was found that the energy absorption capacity of all specimens reduced in different extent with increasing loading angle. Specifically, with the loading angle up to 15°, SEA of the hybrid tube decreased by 10.0% from that with the axial loading; whereas SEA of the CFRP tube decreased by 20.6% from that of the axial loading. It means that the hybrid tube was more capable to mitigate the effects of oblique load on energy absorption capacity in comparison with the net CFRP tube. To better understand the crashing mechanism, numerical models were created and validated by the experimental data. A parametric study was further performed to investigate the effects of loading angle, thickness of aluminum layer, stacking sequence and thickness of CFRP layers on crashworthiness of these structures. It was found that the number of CFRP layers is more important to energy absorption of the hybrid tube. For the pure CFRP tube, there is significant difference between the axial and oblique loading conditions, making it disadvantageous to be a proper crashworthy structure. Whereas for the hybrid tube, the effect of loading angle on energy absorption capacity is considerably mitigated; and consequently, the hybrid configuration offers a higher energy absorption capacity for meeting the crashworthiness requirements accommodating complex impacting angles.

On crushing characteristics of different configurations of metal-composites hybrid tubes

Low-velocity Impact Performance of Composite-Aluminum Tubes Prepared by Mesoscopic Hybridization

Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading

Experimental and numerical investigation of crashworthiness of multicell metal/CFRP tubes

Lateral Crashworthiness Performance of CFRP/aluminum Circular Tubes with Mesoscopic Hybrid Design

Numerical study on energy absorption of aluminum-composite hybrid tubes under axial quasi-static and impact crushing

Parametric Study on the Crashworthiness of the Al/CFRP/GFRP Hybrid Tubes under Quasi-Static Crushing

Crashworthiness analysis and design optimization of square aluminum/CFRP hybrid structures under quasi-static axial loading

On crashing behaviors of bio-inspired hybrid multi-cell Al/CFRP hierarchical tube under quasi-static loading: An experimental study

Quasi-static and low-velocity axial crushing of polyurethane foam-filled aluminium/CFRP composite tubes: An experimental study

Hybrid Metal/Composite Structures Under Quasi-static Axial Compression Loads: A Comparative Study

Energy Absorption and Failure Pattern of Hybrid Composite Tubes under Quasi-Static Axial Compression

Static and dynamic axial crushing of Al/CRFP hybrid tubes with single-cell and multi-cell sections

Crashworthiness of embedded composite structures coupling carbon fiber reinforced plastic tubes and aluminum honeycombs

Crashworthiness analysis and optimization design of special-shaped thin-walled tubes by experiments and numerical simulation

Experimental and Numerical Investigation into Axial Compressive Behaviour of Thin-Walled Structures Filled with Foams and Composite Skeleton

Experimental study on crashworthiness of empty/aluminum foam/honeycomb-filled CFRP tubes

Experimental and numerical studies on the bending collapse of multi-cell Aluminum/CFRP hybrid tubes

Crashworthiness and optimization design of quadruple-cell Aluminum/CFRP hybrid tubes under transverse bending

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Crashworthiness analysis of variable thickness CFRP/Al hybrid multi-cell tube