Abstract:Theoretical prediction model for the compressive behavior of the hybrid tube considering compression angle. The oblique collision happening in vehicle accidents poses a huge threat to passive safety, which causes great difficulties in the design of energy absorption (EA) structures and the prediction of EA capacity due to its highly nonlinear deformation characteristics. This study aims to establish a theoretical prediction model for the compression performance of Carbon Fiber Reinforced Polymer (CFRP)/Al hybrid tube considering the loading angle. First, a high‐precision FE model was established to obtain the influence laws of tube diameter, Al thickness, and CFRP thickness on the crashworthiness of CFRP/Al hybrid tubes, laying the foundation for subsequent theoretical model validation. Second, by summarizing the deformation modes of hybrid tubes generated by various parameter combinations, a modified global origami deformation assumption was proposed under multi‐angle compression conditions, and the key terms in energy composition are extracted based on the initial and final states of folding elements. Third, a theoretical model for predicting the mean crushing forces (MCFs) of hybrid tubes was established by revealing the correlation mechanism between energy composition terms and loading angle. Finally, the theoretical prediction model was validated by experiment and simulation results and the application premise was given. Results showed that the theoretical prediction model was proved to be of high accuracy, as the average absolute prediction errors of MCF under axial, 10°, 20°, and 30° compression conditions were 6.54%, 4.63%, 3.72%, and 3.93%, respectively. This study provides valuable guidance for the forward design and development of multi‐material hybrid structures facing complex crushing conditions. Highlights An analytical model of the hybrid circular tubes considering compression angle is newly proposed. Deformation mode and axial crushing response are analyzed by experiments. The major energy dissipation mechanism for hybrid circular tubes is explicitly derived. The Al thickness has the most significant impact on energy absorption. The recommendations for the design and development of hybrid tube are provided.

Low-velocity Impact Performance of Composite-Aluminum Tubes Prepared by Mesoscopic Hybridization

Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading

Experimental and numerical investigation of crashworthiness of multicell metal/CFRP tubes

Crashworthiness analysis and design optimization of square aluminum/CFRP hybrid structures under quasi-static axial loading

Crashworthiness analysis and optimization design of special-shaped thin-walled tubes by experiments and numerical simulation

Crashworthiness analysis of variable thickness CFRP/Al hybrid multi-cell tube

On crashing behaviors of bio-inspired hybrid multi-cell Al/CFRP hierarchical tube under quasi-static loading: An experimental study

Experimental and numerical studies on bending characteristics of woven CFRP reinforced aluminum thin-walled automotive structures

Numerical simulation and multi-objective optimization of thin-walled aluminum/carbon fiber reinforced plastic hybrid tubes under axial crushing

Crash-worthiness analysis of hollow hybrid structural tube by aluminum with basalt-bamboo hybrid fiber laminates by roll wrapping method

Energy-absorbing mechanism and crashworthiness performance of thin-walled tubes diagonally filled with rib-reinforced foam blocks under axial crushing

Axial Impact Performances of Composite Aluminum Foam Tubes

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Hybrid Metal/Composite Structures Under Quasi-static Axial Compression Loads: A Comparative Study

Crashworthiness analysis and multi‐objective optimization of Al/CFRP hybrid tube with initial damage under transverse impact

Theoretical prediction model for the compressive behavior of the hybrid tube considering compression angle

Integrated design and additive manufacturing of lattice-filled multi-cell tubes

Effect of reinforcement layer number on energy absorption of aluminum-CFRP hybrid square tubes under axial loading: Experimental and numerical study

Improvements in the lateral crushing behavior of syntactic foam‐filled glass fiber reinforced polymer tubes by the addition of straight and helical multiwalled carbon nanotubes

Fabricating sandwich composite tubes using a new thermal expansion technique: Materials preparation and energy absorption characteristics

Lateralized attentional deficits in drug-free and medicated schizophrenic patients