Study of CH4 Detection Method Based on Mid-IR LED
Junfeng Si,Yong Jin,Zhongqin Ge,Yihuang Chen
DOI: https://doi.org/10.13232/j.cnki.jnju.2017.01.022
2017-01-01
Abstract:Monitoring methane(CH4)gas concentration is very important in mines and tunnels.This paper proposes a method of CH4 gas concentration detection based on the principle of absorption spectrum,taking Mid-infrared light emitting diode(Mid-IR LED)as the light source.The method adopts 5.8 kHz AC constant current source to excite the infrared light emitting diode,The middle infrared light generated by the middle infrared light emitting diode is absorbed by methane in the air chamber,and is irradiated on the middle infrared photoelectric diode,Due to the extremely weak of light current generated by photodiode,it must be preamplifier by high gain amplifier.The center frequency of the amplifier is 5.8 kHz,and the bandwidth is 0.5 kHz.In order to eliminate the noise,improve the sensitivity of methane detection,we designed lock-in amplifier circuit to amplify the voltage associated with the gas concentration,the lock-in amplifier bandwidth is set to 10 Hz,which can satisfy with the change of gas concentration effectively.Finally,The data acquisition system,which is composed of a single chip microprocessor,is used to make the data of the detection result,The data is processed,the nonlinear error of the detection system is corrected,and the gas concentration detection results are displayed.Moreover,the verification system based on this method was built,by using low cost Mid-IR LED devices and weak signal detection technology.The experiment displays that the proposed method has the advantages of short detection time,simple operation,high accuracy and strong adaptability to the environment,being a feasible measurement one.