Abstract:Tandem solar cells are one of the fastest‐growing PV technology, since, it efficiently overcomes the thermalization and non‐absorption losses. However, appropriate absorber materials with suitable bandgaps are required to design an efficient tandem solar cell. In this context, the present research paper brings forth the results of simulation‐based studies carried out on thin‐film/CQD based 2‐T monolithic tandem solar cell that can be processed easily at a reduced cost. The device has been designed using a‐Si: H of wide bandgap (1.7eV) as top cell and PbS CQD of narrow bandgap (1.2eV) as the bottom cell. The feasibility of the proposed design is investigated in two steps. Initially, top and bottom subcell are designed and calibrated to have state of the art conversion efficiency of 6.86% and 9.38%, respectively in accordance with the previous literature. Afterwards, the bottom cell is inverted to get the desired direction of electron flow in accordance with the top cell. The thickness of the inverted bottom cell has been optimized as 200 nm so as to obtain 8.34% efficiency. Standalone condition reflected JSC and VOC of 9.97 mA.cm−2 and 0.91 V in top cell, and 21.28 mA.cm−2 and 0.63 V in the bottom cell. Further, both the top and bottom subcells are evaluated for tandem configuration with the help of ITO based interlayer to provide the current matching conditions. In the proposed tandem design, the thickness of the absorber layers is optimized to achieve the highest JSC, which is indeed limited by the top cell owing to lower JSC value of 10.61 mA.cm−2 in standalone condition. Optimized tandem design with 200 nm/150 nm thick absorber layer based top/bottom subcell resulted in JSC of 10.52 mA.cm−2, VOC of 1.59 V, FF of 71.65% and PCE of 12.02%.This article is protected by copyright. All rights reserved.

Efficient Top-Illuminated Organic-Quantum Dots Hybrid Tandem Solar Cells with Complementary Absorption

Perovskite/Colloidal Quantum Dot Tandem Solar Cells: Theoretical Modeling and Monolithic Structure

Toward high-efficiency solution-processed tandem solar cells

High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration

Monolithic Organic/Colloidal Quantum Dot Hybrid Tandem Solar Cells via Buffer Engineering

Tandem Organic Solar Cell with 20.2% Efficiency

Proposal and Design of Organic/CIGS Tandem Solar Cell: Unveiling Optoelectronic Approaches for Enhanced Photovoltaic Performance

Efficient hybrid colloidal quantum dot/organic solar cells mediated by near-infrared sensitizing small molecules

Hybrid Perovskite Quantum Dot/Non‐Fullerene Molecule Solar Cells with Efficiency Over 15%

Design and Simulation of a‐Si:H/PbS Colloidal Quantum Dots Monolithic Tandem Solar Cell for 12% Efficiency

A Tandem Organic Photovoltaic Cell with 19.6% Efficiency Enabled by Light Distribution Control

High Efficiency Non-fullerene Organic Tandem Photovoltaics Based on Ternary Blend Subcells

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

Boosting the Efficiency of Perovskite/Organic Tandem Solar Cells via Enhanced Near‐Infrared Absorption and Minimized Energy Losses

Stable and Highly Efficient PbS Quantum Dot Tandem Solar Cells Employing a Rationally Designed Recombination Layer

Near-infrared absorbing acceptor with suppressed triplet exciton generation enabling high performance tandem organic solar cells

Microcavity-enhanced light-trapping for highly efficient organic parallel tandem solar cells.

Monolithic perovskite/organic tandem solar cells with 23.6% efficiency enabled by reduced voltage losses and optimized interconnecting layer

Efficient Tandem Organic Photovoltaics with Tunable Rear Sub-cells

Recent Development of Organic-Inorganic Perovskite-Based Tandem Solar Cells

Synergistic Enhancement of Efficient Perovskite/Quantum Dot Tandem Solar Cells Based on Transparent Electrode and Band Alignment Engineering