Abstract:Tungsten fiber-reinforced tungsten composite (Wf/W) material is considered a plasma-facing material (PFM) with good application prospects. Commercial tungsten wire (fiber) prepared through forging and drawing processes has excellent mechanical properties, as well as a very high recrystallization temperature due to the unique texture of it grain structure. Commercial tungsten fiber is the most proper reinforcement for Wf/W. The change in the properties of tungsten fiber because of neutron irradiation makes it inevitable for Wf/W to be used as PFMs. However, there is very little research on the change in the properties of tungsten fiber caused by neutron irradiation. In this work, we used heavy ion irradiation to simulate the displacement damage generated by neutron irradiation to explore the alteration of the properties of a commercial tungsten fiber caused by neutron irradiation. The investigated subject was tungsten fiber with a diameter of 300 μm. The irradiation source was 7.5 MeV Au2+, which generated a maximum displacement damage of 60 dpa at a depth of 400 nm, and the irradiation influenced depth was 1000 nm. Because of the irradiation, significant lattice distortion occurred within the tungsten fiber, resulting in the transition from (110) texture to (100) texture at the fiber’s cross-section. The results of the Schmidt factor and Taylor factor analysis indicate a decrease in the plasticity of the tungsten fiber after irradiation, but it did not completely lose its plasticity. The results of the nanoindentation test confirmed the radiation hardening. After irradiation, the hardness of the tungsten fiber increased by approximately 0.33 GPa, but this increase was relatively small compared to other tungsten-based materials. This indicates that commercial tungsten fiber is a low-cost and highly reliable reinforcement material for Wf/W composite materials.

Study of Irradiation Damage Induced by He2+ Ion Irradiation in Ni62Ta38 Metallic Glass and W Metal

The Microstructural and Hardness Changes of Tungsten Fiber after Au2+ Irradiation

Effect of high-energy Ne ions irradiation on mechanical properties difference between Zr63.5Cu23Al9Fe4.5 metallic glass and crystalline W

Surface features of Zr-based and Ti-based metallic glasses by ion irradiation

Mechanisms for the Free Volume Tuning the Mechanical Properties of Metallic Glass Through Ion Irradiation

Effect on microstructure of Fe80B13Si7 metallic glass irradiated by high intensity pulsed ion beam and He ions

Effects of ion irradiation in metallic glasses

Roles of Ion Irradiation and Thermal Annealing in Inducing Crystallization in Metallic Glass

Structure and mechanical property modification of a Ti-based metallic glass by ion irradiation

Effects of He ion irradiation on the structural stability and deformation behavior in Zr63.5Cu23Al9Fe4.5 and Fe80B13Si7 metallic glasses

Crystallization behavior and mechanical response of metallic glass induced by ion irradiation at elevated temperature

An experimental and modeling study on the role of damage cascade formation in nanocrystalization of ion-irradiated Ni52.5Nb10Zr15Ti15Pt7.5 metallic glass

Microstructural Evolution and Mechanical Properties in Cu48Zr48Al4 Bulk Metallic Glass Composites Induced by He+ Ion Irradiation

Whiskers Growth and Self-Healing in Ti-based Metallic Glasses During Ion Irradiation

Nanocrystallization of Cu50Zr45Ti5 Metallic Glass Induced by Electron Irradiation

Mechanism of Local Hardening in Metallic Glass During He Ion Irradiation

Nanoindentation Studies of the Effects of Ion Irradiation on the Near Surface Mechanical Response of Annealed Ti40cu32pd14zr10sn2si2 Metallic Glass Ribbons

Nanocrystallization of Cu<SUB>50</SUB>Zr<SUB>45</SUB>Ti<SUB>5</SUB> Metallic Glass Induced by Electron Irradiation

Effects of Cu ion irradiation in Cu50Zr45Ti5 metallic glass

Effect of ion irradiation in an Al 90 Fe 2 Ce 8 metallic glass

Stability of Nanocrystallites Dispersed in Cu50Zr45Ti5 Metallic Glass under Electron Irradiation.