Abstract:Ti-Ta thin films exhibit properties that are of interest for applications as microactuators and as biomedical implants. A Ti-Ta thin film materials library was deposited at T = 25 °C by magnetron sputtering employing the combinatorial approach, which led to a compositional range of Ti87Ta13 to Ti14Ta86. Subsequent high-throughput characterization methods permitted a quick and comprehensive study of the crystallographic, microstructural, and morphological properties, which strongly depend on the chemical composition. SEM investigation revealed a columnar morphology having pyramidal, sharp tips with coarser columns in the Ti-rich and finer columns in the Ta-rich region. By grazing incidence X-ray diffraction four phases were identified, from Ta-lean to Ta-rich: ω phase, α″ martensite, β phase, and a tetragonal Ta-rich phase (Ta(tetr)). The crystal structure and microstructure were analyzed by Rietveld refinement and clear trends could be determined as a function of Ta-content. The lattice correspondences between β as the parent phase and α″ and ω as derivative phases were expressed in matrix form. The β ⇌ α″ phase transition shows a discontinuity at the composition where the martensitic transformation temperatures fall below room temperature (between 34 and 38 at. % Ta) rendering it first order and confirming its martensitic nature. A short study of the α″ martensite employing the Landau theory is included for a mathematical quantification of the spontaneous lattice strain at room temperature (ϵ̂max = 22.4(6) % for pure Ti). Martensitic properties of Ti-Ta are beneficial for the development of high-temperature actuators with actuation response at transformation temperatures higher than 100 °C.

Microstructural Characterization and Properties of Ti-28Ta At.% Powders Produced by Plasma Rotating Electrode Process

Titanium-Tantalum Alloy Powder Produced by the Plasma Rotating Electrode Process (PREP)

Effects of plasma rotating electrode process parameters on the particle size distribution and microstructure of Ti-6Al-4 V alloy powder

Effect of Preparation Process on the Microstructure and Characteristics of TiAl Pre-Alloyed Powder Fabricated by Plasma Rotating Electrode Process

Microstructure and mechanical properties of Ta–Ti alloy by plasma-activated sintering

Effects of carbon addition on the microstructure and mechanical property of in-situ reinforced TiAl matrix composite powders produced by plasma rotating electrode process

Microstructure and Mechanical Properties of Ti-TiBw-x%Cu Composites by Powder Metallurgy Using Atomized Ti-TiBw Powder As Raw Materials

Preparation and Microstructure of High-Activity Spherical TaNbTiZr Refractory High-Entropy Alloy Powders

Surface characterization of plasma rotating electrode atomized 30CrMnSiNi2A steel powder

Microstructure Evolution and High-Temperature Tensile Behavior of the Powder Extruded 2.5 Vol% TiBw/TA15 Composites

Microstructure Evolution and Mechanical Properties of Ti-25Ta Alloy Fabricated by Selective Laser Melting and Hot Isostatic Pressing

Investigation on the Microstructure and Mechanical Properties of the Ti-Ta Alloy with Unmelted Ta Particles by Laser Powder Bed Fusion

First principles study of Ti-Zr-Ta alloy Phase Stability and Elastic Properties

Crystallographic Structure Analysis of a Ti–Ta Thin Film Materials Library Fabricated by Combinatorial Magnetron Sputtering

Effects of process parameters and cooling gas on powder formation during the plasma rotating electrode process

Centrifugal granulation behavior in metallic powder fabrication by plasma rotating electrode process

Microstructure and Properties of Ta-W Alloys Fabricated by Spark Plasma Sintering Technology

Preparation and properties of Ti-Zr-Ta alloy assisted by hydrogenation

Texture Evolution and Mechanical Behavior of Commercially Pure Ti Processed Via Pulsed Electric Current Treatment

Electron beam powder bed fusion of Ti-30Ta high-temperature shape memory alloy: microstructure and phase transformation behaviour

Evaluation of the microstructures, strengthening mechanisms and corrosion behaviors of TiB2 powder added to Ti–8Ta–6Ni alloys through the vacuum sintering process