Abstract:Precast composite slabs are an essential component in concrete-prefabricated buildings. At present, there are problems such as overweightedness and imperfect test for quality and structural performance of the precast floors, leading to restriction in the development of prefabricated buildings. In this study, by using industrial solid-waste high-titanium heavy slag as coarse and fine aggregates, with fly ash and silica fume for the partial substitution of the cement, we developed a green lightweight precast composite slab of high-titanium heavy-slag concrete (LPCSHTHSC) after adding shale ceramite as the light aggregate. By selecting the weight and the strength of LPCSHTHSC as the technical control indexes, we performed an orthogonal test of lightweight proportions. Through a comprehensive analysis of the compressive strength, splitting tensile strength, density, and an economic consideration, the optimal proportion was determined as follows: water-to-binder ratio of 0.43, mixing amount of the fly ash of 4%, mixing amount of the silica fume of 8%, mixing amount of the water-reducing agent of 0.5%, sand ratio of 35%, and cement at the strength grade of 42.5. Next, the bending performance test was conducted on LPCSHTHSC. According to the results, the LPCSHTHSC exhibited excellent mechanical performance, and its ultimate bearing capacity far exceeded the designed value. The ultimate bearing capacity calculated using the plastic hinge wire method differed slightly from the test value, suggesting the applicability of the proposed method to the calculation of the ultimate bearing capacity. Finally, the finite element analysis results of LPCSHTHSC were consistent with the actual bending mechanical performance test results, which proved both the accuracy and the reliability of the present finite element analysis based on the plastic damage constitutive model. The present study can provide an insightful theoretical and test foundation for the lightweight application of high-titanium heavy-slag concrete in other prefabricated components.

Use Of Preplaced Casting Method In Lightweight Aggregate Concrete

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Characteristics of Lightweight Concrete Fabricated with Different Types of Strengthened Lightweight Aggregates

Experimental Study on Lightweight Precast Composite Slab of High-Titanium Heavy-Slag Concrete

Proposing a New Method Based on Image Analysis to Estimate the Segregation Index of Lightweight Aggregate Concretes

3D printing lightweight aggregate concrete prepared with shell-packing-aggregate method - Printability, mechanical properties and pore structure

Mechanical properties and microstructure of ultra-high strength concrete with lightweight aggregate

Mechanical Properties of Concrete Produced by Light Cement-Based Aggregates

Research on the Development and Joint Improvement of Ceramsite Lightweight High-Titanium Heavy Slag Concrete Precast Composite Slab

Experimental Prognostication of Ultra-High-Performance Lightweight Hybrid Fiber-Reinforced Concrete by Using Sintered Fly Ash Aggregate, Palm Oil Shell Aggregate, and Supplementary Cementitious Materials

Preparation and properties of ultra-high performance lightweight concrete

Internal Curing of Saturated Lightweight Aggregate in High Performance Combined Concrete

Experimental Investigation on the High Strength and High Performance Preplaced Aggregate Concrete

Research on shrinkage control technology of lightweight ultra-high performance concrete

LC50 fly ash microbead lightweight high-strength concrete: mix ratio design, stress mechanism, and life cycle assessment

Geopolymer Concrete with Lightweight Fine Aggregate: Material Performance and Structural Application

The Possibility of Producing Self-Compacting Lightweight Concrete by Using Expanded Polystyrene Beads as Coarse Aggregate

The Influence of Slag Content on the Structure and Properties of the Interfacial Transition Zone of Ceramisite Lightweight Aggregate Concrete

Water absorption, permeability, and resistance to chloride-ion penetration of lightweight aggregate concrete

Substitution of sewage sludge ash for sand in concrete containing sintered coarse aggregate: A lightweight concrete with fully solid waste aggregate

Research on the Water Absorption and Release Characteristics of a Carbonized γ-C2S Lightweight Aggregate in Lightweight and High-Strength Concrete