Abstract:This paper presents a design for compact bandpass filters (BPFs) that feature high selectivity. This high selectivity is achieved through the use of open-/short-circuited coupled-line segments at the filter's input and output and a pair of symmetrical parallel-coupled lines connected to a pair of open stepped-impedance resonators (SIRs) introducing three transmission zeros (TZs) on either side of the passband. In addition, two different designs for these BPFs, one with a fixed bandwidth and one with a tunable bandwidth are also presented. The characteristics of the proposed structure are analyzed using even-, odd-mode and ABCD analyses. To enable bandwidth tuning, two varactor diodes are added to the edges of the open SIRs, allowing the TZs to be adjusted around the upper band edge. The paper includes details of two prototypes that were designed, fabricated, and tested: Filter A with a constant bandwidth that covers the entire S-band (2-4 GHz) and a 3-dB fractional bandwidth (FBW) of 60%, and Filter B with a tunable bandwidth and a 3-dB FBW that varies from 12% to 60%. The filters have been measured to have insertion loss of less than 0.8 dB for Filter A and less than 1.1 dB for Filter B throughout the passband, and return loss of greater than 16 dB and 15 dB for Filter A and B, respectively. These filters have a compact size of less than , and feature high selectivity with a wide 3-dB bandwidth tuning range ratio, as well as an upper stopband suppression level of more than 40 dB.

Novel Tri-Band Bandpass Filter with One High Selective Tunable Passband

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

A CMOS 1.3-1.7GHz Q-Enhanced LC Band-pass RF Filter with 1.5-67% Tunable Fractional Bandwidth

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

Design of dual-band tunable bandpass filter with constant absolute bandwidth based on triple transmission path

A New Class of High-Selectivity Bandpass Filters With Constant Bandwidth and 5:1 Bandwidth Tuning Ratio

A Triple-Mode Passband Filter With Improved Upper-Stopband Performance

A Compact Tri-Band Microstrip Filter with Independently Tunable Passbands and High Selectivity

Balanced tri- and quad-band BPFs based on SIR with improved passbands selectivity

A 10.23–15.7-GHz Varactor-Tuned Microstrip Bandpass Filter With Highly Flexible Reconfigurability

Compact high-selectivity tunable dual-mode filter with constant bandwidth by adopting frequency-dependent S-L coupling

Sharp-rejection dual ultra-wideband bandpass filter using sextuple mode resonator

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Tunable Bandpass Filter Using a Switched Tunable Diplexer Technique.

Synthesis Design of Wideband Bandpass Filter With High Selectivity and Harmonic Suppression

Design of high selectivity tri-band bandpass filter based on triple transversal transmission path

Tri-band Superconducting Bandpass Filter with Controllable Passband Specifications