Abstract:The Navy Prototype Optical Interferometer (NPOI) near Flagstaff, Arizona, makes use of separate smaller optical elements spaced along a Y-array and used simultaneously to simulate an equivalent single large telescope. The instrument is useful in generating and upgrading existing astronomical catalogues and investigating synthetic aperture optical imaging techniques. The NPOI is a joint collaboration between the US Naval Observatory and Naval Research Laboratory in collaboration with the Lowell Observatory. Stellar radiation (visible light) reflects off 35 cm diameter flat mirrors, also known as siderostats, toward a tilt-tip mirror, which reflects a 12 cm diameter beam through a multi-reflection relay transport system. To maximize the reflective area of the siderostat optics and achieve an increase by a factor of 8.5 in light collecting area, a beam compressor is to be installed between the siderostat and fast tip/tilt mirror. However, the present configuration of a prototype beam compressor mount (BCM) vibrates at unacceptable amplitudes, which makes it nearly impossible to optically align the mirrors. This paper presents the results of finite element analyses conducted to quantify the design limitations of the prototype beam compressor mount. The analyses indicated that the current configuration is too soft, with very low fundamental frequencies, which verified the difficulties encountered during alignment tests. Based on these results, design modifications have been proposed to increase the overall structural stiffness of the mount and increase its fundamental frequency of vibration. These modifications will mechanically stabilize the structure for the alignment of the optics, and allow integration of the compressor into the interferometer. The interferometer will then have the capability to capture more light from each siderostat and allow observations of fainter stellar targets. More generally, the results can be useful as a guide for engineers and scientists involved in the design of similar optomechanical structures.

The Navy Precision Optical Interferometer: an Update

The Navy Precision Optical Interferometer (npoi): an Update

The Navy Precision Optical Interferometer: Large-Aperture Observations and Infrastructure Improvements

The Navy Precision Optical Interferometer: Two years of development towards large-aperture observations

NPOI: Recent Progress and Future Prospects

Automation Upgrades at the Navy Precision Optical Interferometer

Operational Experience with the Navy Prototype Optical Interferometer

Vision: A Six-Telescope Fiber-Fed Visible Light Beam Combiner for the Navy Precision Optical Interferometer

Current alignment techniques and tools for building, aligning, and reconfiguring an optical array at the Navy Prototype Optical Interferometer

Simultaneous Six-way Observations from the Navy Precision Optical Interferometer

An Approach to Upgrading the Beam Transport System at the Navy Precision Optical Interferometer

Using Optical Interferometry for Geo Satellites Imaging: an Update

Toward Complex Visibilities Using Optical Interferometry: Multiwavelength Phase Referencing

Precision Narrow-Angle Astrometry of Binary Stars with the Navy Prototype Optical Interferometer

Optical Drift Test of the Long Delay Line Stations on the Navy Prototype Optical Interferometer

Intensity Interferometry at Calern and beyond: progress report

Optical Mount Modifications for Increased Articulation at the Navy Prototype Optical Interferometer

H-Alpha Observations Using Closure Phases at the Npoi

Stiffening an off-axis beam compressor mount for improved performance

Multiple-baseline Detection of a Geostationary Satellite with the Navy Precision Optical Interferometer

Using Differential Phases in Optical Interferometry