Abstract:The Navy Prototype Optical Interferometer (NPOI) near Flagstaff, Arizona, makes use of separate smaller optical elements spaced along a Y-array and used simultaneously to simulate an equivalent single large telescope. The instrument is useful in generating and upgrading existing astronomical catalogues and investigating synthetic aperture optical imaging techniques. The NPOI is a joint collaboration between the US Naval Observatory and Naval Research Laboratory in collaboration with the Lowell Observatory. Stellar radiation (visible light) reflects off 35 cm diameter flat mirrors, also known as siderostats, toward a tilt-tip mirror, which reflects a 12 cm diameter beam through a multi-reflection relay transport system. To maximize the reflective area of the siderostat optics and achieve an increase by a factor of 8.5 in light collecting area, a beam compressor is to be installed between the siderostat and fast tip/tilt mirror. However, the present configuration of a prototype beam compressor mount (BCM) vibrates at unacceptable amplitudes, which makes it nearly impossible to optically align the mirrors. This paper presents the results of finite element analyses conducted to quantify the design limitations of the prototype beam compressor mount. The analyses indicated that the current configuration is too soft, with very low fundamental frequencies, which verified the difficulties encountered during alignment tests. Based on these results, design modifications have been proposed to increase the overall structural stiffness of the mount and increase its fundamental frequency of vibration. These modifications will mechanically stabilize the structure for the alignment of the optics, and allow integration of the compressor into the interferometer. The interferometer will then have the capability to capture more light from each siderostat and allow observations of fainter stellar targets. More generally, the results can be useful as a guide for engineers and scientists involved in the design of similar optomechanical structures.

Operational Experience with the Navy Prototype Optical Interferometer

Automation Upgrades at the Navy Precision Optical Interferometer

The Navy Precision Optical Interferometer (npoi): an Update

The Navy Precision Optical Interferometer: an Update

Current alignment techniques and tools for building, aligning, and reconfiguring an optical array at the Navy Prototype Optical Interferometer

The Navy Precision Optical Interferometer: Two years of development towards large-aperture observations

NPOI: Recent Progress and Future Prospects

The Navy Precision Optical Interferometer: Large-Aperture Observations and Infrastructure Improvements

An Approach to Upgrading the Beam Transport System at the Navy Precision Optical Interferometer

Simultaneous Six-way Observations from the Navy Precision Optical Interferometer

Optical Drift Test of the Long Delay Line Stations on the Navy Prototype Optical Interferometer

Vision: A Six-Telescope Fiber-Fed Visible Light Beam Combiner for the Navy Precision Optical Interferometer

A Multi-Synchronous Architecture to Control an Array of Networked Siderostats or Telescopes at the Navy Precision Optical Interferometer

Precision Narrow-Angle Astrometry of Binary Stars with the Navy Prototype Optical Interferometer

Optical Mount Modifications for Increased Articulation at the Navy Prototype Optical Interferometer

Stiffening an off-axis beam compressor mount for improved performance

Toward Complex Visibilities Using Optical Interferometry: Multiwavelength Phase Referencing

Using Differential Phases in Optical Interferometry

Optimizing the Frequency Response of a Steering Mirror Mount for Interferometry Applications

Using Optical Interferometry for Geo Satellites Imaging: an Update

Recent Developments of Interferometric Wavefront Sensing