Abstract:The dislocation structure formation under low-amplitude fatigue in fcc metals for multislip loading conditions is investigated using three-dimensional discrete dislocation dynamics. Tools based on graph analysis, a statistical description of stable dislocation arrangements such as dislocation dipoles and prismatic loops are developed and applied. Upon decreasing the loading amplitude one order of magnitude below the persistent slip band threshold, although qualitative microstructural differences are seen, the elementary features of the investigated defects are the same. A critical number of cycles is required to produce sessile Lomer junctions that stabilize the structure and result in dislocation clustering around them. The crystallographic orientation of the crystal with respect to the loading axis results in different patterns strongly linked to sessile junctions, which are analyzed using spatial correlation functions. The increase in irreversible bulk dislocation arrangements results in roughening of the free surface and increase in surface step heights. Furthermore the crystallographic orientation with respect to the free surface is shown to control the dislocation density evolution combined with the macroscopic Schmid factor. Mechanical fatigue due to cyclic loading remains one of the most challenging problems in materials science. For fcc metals, low- and high cycle fatigue have been thoroughly studied experimentally [ 1 – 8 ]. Fatigue failure in fcc metals is found to be often due to surface roughening with increasing number of loading cycles, leading finally to stress concentration and eventually incipient crack initiation. It is well established that dislocations form persistent slip bands (PSBs) causing surface roughness [ 9 – 13 ]. Irreversible dislocation structures are composed primarily of dislocation dipoles and prismatic loops. Earlier in the 1960s several experimental groups investigated those elementary dislocation arrangements and discovered the important role of prismatic dislocation loops in strain hardening [ 14 , 15 ] and identified cross-slip as a necessary mechanism required for their formation [ 16 , 17 ]. Quantification of prismatic loops in terms of shape and type as well as more precise description of the formation mechanism were given by Feltner [ 18 , 19 ]. More recently, unexpected failure of technical applications in the very high cycle fatigue regime (VHCF) for more than 10 7 cycles and below the PSB-threshold caused to readdress the concept of fatigue limit. Ultrasonic- [ 20 ] and piezoelectric [ 21 , 22 ] modern fatigue testing facilities with loading frequencies up to 20 kHz were developed to investigate this problem. Similar to low cycle fatigue, it was shown by [ 23 , 24 ] that fatigue failure in polycrystalline copper in the VHCF-regime is due to cyclic strain localization within PSBs. Nonetheless, details and mechanisms of the microstructural behavior at the dislocation level remain unexplored. Since dislocation structure formation is controlled by geometrical dislocation arrangement due to elastic interactions between dislocations, the meso-scale simulation method discrete dislocation dynamics (DDD) gives detailed insight into the structure formation mechanisms. Furthermore the role of microstructural parameters, e.g. grain shape and orientation, on structure correlations is accessible. Several groups have used DDD under cyclic loading to explore the mechanisms leading to irreversible dislocation structure formation. A detailed analysis of single- and double slip loading conditions were given in [ 25 , 26 ]. It was shown that an initial single Frank–Read source can yield, due to annihilation and cross-slip processes only, a dipolar dislocation microstructure which shows good agreement with experiments. It was found that slip band spacing was inversely proportional to the square of the slip band thickness. The authors stress the role of cross-slip for strain localization and show that double slip conditions lead to more damage than single slip. Based on statistical distribution of dipole heights, the same group [ 27 ] derived a model which could reproduce precisely an experimental hysteresis loop. In [ 28 ] results using DDD showed the role of source position, character and length on prismatic loop development while molecular dynamics demo -Abstract Truncated-

Unified Factor Controlling the Dislocation Evolution of Fatigued Face-Centered Cubic Crystals

Arrangement and Decomposition of Grain Boundary Dislocations: Two-Mode Phase-Field Crystal Simulation

Dislocation Structures in Fatigued Cu Single Crystals with a Special Single-Slip Orientation

The Dissociation Behavior of Dislocation Arrays in Face Centered Cubic Metals

Distinct Fatigue Cracking Modes of Grain Boundaries with Coplanar Slip Systems

Dislocation Dynamic Simulation of Dislocation Pattern Evolution in the Early Fatigue Stages of Aluminium Single Crystal

Study of fatigue dislocation structures in [233] coplanar double-slip-oriented copper single crystals using SEM electronic channelling contrast

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

SEM Electron Channeling Contrast Imaging of Dislocation Structures in Fatigued [017] Cu Single Crystals Oriented for Critical Double Slip

Atomistic Simulations for the Evolution of a U-shaped Dislocation in Fcc Al

Dislocation Arrangements Within Slip Bands During Fatigue Cracking

Study Of Fatigue Dislocation Structures In [(2)Over-Bar33] Coplanar Double-Slip-Oriented Copper Single Crystals Using Sem Electronic Channelling Contrast

Dislocation Density Evolution in Low-Cycle Fatigue of Steels Using Dislocation-Based Crystal Plasticity

Analysis of dislocation microstructure characteristics of surface grains under cyclic loading by discrete dislocation dynamics

Effective Stacking Fault Energy in Face-Centered Cubic Metals

Intergranular fracture, grain-boundary structure, and dislocation-density interactions in FCC bicrystals

Stress Dependence of the Dislocation Core Structure and Loop Nucleation for Face-Centered-cubic Metals

Investigations on Thermal Stability of Fatigue Dislocation Structures in Conjugate and Critical Double-Slip-Oriented Cu Single Crystals

Discrete Dislocation Density Modelling of Single Phase FCC Polycrystal Aggregates

Stress-dependence of Dislocation Dissociation, Nucleation and Annihilation in Elastically Anisotropic Cu

Interface Dislocation Patterns and Dislocation Nucleation in Face-Centered-cubic and Body-Centered-cubic Bicrystal Interfaces