Abstract:For a proton exchange membrane (PEM), the ratio of its proton conductivity to its fuel permeability usually defines the membrane selectivity. Generally, a highly selective PEM is preferred for application in direct methanol fuel cells. Herein, sulfonated SiO2@polystyrene core–shell (SiO2@sPS) nanoparticles were synthesized and then imbedded into a Nafion membrane by a blending–casting method. SiO2@sPS partakes in strong interactions with the Nafion polymer, which benefits its dispersion in the membrane matrix. The as-prepared SiO2@sPS + Nafion composite PEM presents a large increase in its proton conductivity owing to the introduction of additional –SO3H groups and hence has optimized channels for proton transport. Meanwhile, a reduced methanol crossover was also observed for the SiO2@sPS + Nafion composite PEM because of the formation of obstructed transport channels for bulk methanol. Besides this, a deep investigation on further enhancement of the membrane’s performance was conducted by etching the SiO2 core and hence forming well-dispersed uniform hollow spheres inside the membrane matrix. The intact hollow sulfonated PS spheres (h-sPS) acted as water reservoirs which in turn could gradually release water to hydrate the membrane under high-temperature and low-humidity conditions. Therefore, compared to the SiO2@sPS + Nafion membrane, the h-sPS + Nafion one presented a further increased proton conductivity at 100 °C under 40% RH. Meanwhile, h-sPS further suppressed methanol penetration by trapping it inside the hollow spheres. Herein, a “H2O donating/methanol accepting” mechanism was proposed for the first time, providing a promising platform to alleviate critical disadvantages of Nafion membranes and thereby fabricate highly selective Nafion-based PEMs.

Mesoporous hollow silica spheres as micro-water-tanks in proton exchange membranes

Effects of Microstructure on the Retention of Proton Conductivity of Nafion/SiO2 Composite Membranes at Elevated Temperatures:An in Situ SAXS Study

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Nafion/IL Intermediate Temperature Proton Exchange Membranes Improved by Mesoporous Hollow Silica Spheres

Preparation and Properties of Proton Exchange Membranes Based-on Nafion® and Phosphonic Acid-Functionalized Hollow Silica Spheres

Enhanced Proton Conductivity of the Hybrid Membranes by Regulating the Proton Conducting Groups Anchored on the Mesoporous Silica

Preparation and Properties of Nafion®/hollow Silica Spheres Composite Membranes

Self-assembled Nafion®/metal oxide nanoparticles hybrid proton exchange membranes

A “H2O Donating/methanol Accepting” Platform for Preparation of Highly Selective Nafion-based Proton Exchange Membranes

Novel Nafion composite membranes with mesoporous silica nanospheres as inorganic fillers

Toward Anhydrous Proton Conductivity Based on Imidazole Functionalized Mesoporous Silica/Nafion Composite Membranes

Trifluoromethanesulfonimide-based hygroscopic semi-interpenetrating polymer network for enhanced proton conductivity of nafion-based proton exchange membranes at low humidity

Studies on Sulfonic Acid Functionalized Hollow Silica Spheres/nafion® Composite Proton Exchange Membranes

Preparing Proton Exchange Membranes Via Incorporating Silica-Based Nanoscale Ionic Materials for the Enhanced Proton Conductivity

Proton exchange membranes based on semi-interpenetrating polymer networks of polybenzimidazole and perfluorosulfonic acid polymer with hollow silica spheres as micro-reservoir

Fabrication of Hybrid Membranes by Incorporating Acid–base Pair Functionalized Hollow Mesoporous Silica for Enhanced Proton Conductivity

Water-Retention Proton Exchange Membrane Assisted with Various Nanostructures Silica

A Facile Route to Enhance the Properties of Polymer Electrolyte-Based Organic–inorganic Hybrid Proton Exchange Membranes

Preparation and performance of nano silica/Nafion composite membrane for proton exchange membrane fuel cells