Mechanical behavior of artificially cemented clay with open structure: Cell and physical model analyses

Mingjing Jiang,Tao Li,Yu-Jun Cui,Hehua Zhu

DOI: https://doi.org/10.1016/j.enggeo.2017.03.002

IF: 6.902

2017-01-01

Engineering Geology

Abstract:In this study, the authors developed an innovative method of artificially preparing cemented clay with relatively large void ratio and explored the properties of the clay through cell and physical model tests. The artificially cemented clay was produced by mixing a defined amount of cement and ice particles with uncemented materials to reproduce interparticle chemical bonds and large pores found in naturally cemented clay. Confined compression and anisotropic compression were performed on the artificially cemented clay specimens, and results showed that the artificially cemented clay does successfully reproduce the primary mechanical properties of naturally cemented clay. Interparticle bonds were primarily responsible for enhanced structural yield stress in compression tests on the clay; the consolidation process damaged the soil structure while simultaneously densifying it. Using specially designed equipment, consolidated-undrained and drained physical loading tests were conducted on a model ground with the artificially cemented clay to measure the footing settlement, specimen surface displacement, and pore water pressure after each step load. A critical load can be identified in the physical model test, near which the pore water pressure increased very quickly during the consolidated-undrained model test.