Abstract:The self-closed bonds limit the molecular adsorption on graphene, which in turn leads to low sensitivity of the gas sensors. In this article, a gas sensor based on surface-oxidized chemical vapor deposited (CVD) graphene is presented for ammonia (NH3) gas sensing. Oxygen functional groups are introduced in graphene through the in situ UV-ozone (UVO) treatment, which is considered to be convenient, low cost, and compatible with large-scale preparation. The NH3 with concentration ranging from 50 to 500 ppm has been tested to evaluate the sensing performance of the proposed gas sensors. The results show that sensor treated for 4 min exhibits the best response to NH3 which is over four times than that of pristine graphene. More importantly, the sensing response increases linearly from 8.93% to 43.11% under 500-ppm NH3 as UVO treatment time increase in the range from 0 to 4 min, whereas the gas response decreased to 28.15% after exposure time is up to 8 min. This may be because surface oxidation dominates during short-term UVO exposure, but destructive etching dominates during a long-term exposure. In addition, the response speed of UVO-treated gas sensor is much faster than that of pristine graphene, whereas no significant change is observed in the recovery process. The proposed gas sensor also exhibits good selectivity, while there is a slight degradation of 5% in long-term stability after 18 days. The proposed facile method may provide reference value for the improvement of surface modification and gas sensing properties of other two-dimensional (2-D) materials.

Improving the Sensitive Property of Graphene-Based Gas Sensor by Illumination and Heating

High Sensitive Reduced Graphene Oxide-Based Room Temperature Ionic Liquid Electrochemical Gas Sensor with Carbon-Gold Nanocomposites Amplification

Understanding and optimization of graphene gas sensors

Au-decorated Porous Structure Graphene with Enhanced Sensing Performance for Low-Concentration NO 2 Detection

A Facile Way to Improve the Sensing Performance of CVD Graphene

Gas Sensor Based on Defective Graphene/pristine Graphene Hybrid Towards High Sensitivity Detection of NO2

A 3D Chemically Modified Graphene Hydrogel for Fast, Highly Sensitive, and Selective Gas Sensor.

Highly sensitive and rapidly responding room-temperature NO 2 gas sensors based on WO 3 nanorods/sulfonated graphene nanocomposites

No2 Gas Sensor Based On Graphene Decorated With Ge Quantum Dots

Mosaic-Like Micropatterned Monolayer RGO/AgNPs Film Gas Sensor with Enhanced Room-Temperature NO2 Response/Recovery Properties

The Effect of Thin Film Fabrication Techniques on the Performance of Rgo Based NO2 Gas Sensors at Room Temperature

Ag-Modified 3D Reduced Graphene Oxide Aerogel-Based Sensor with an Embedded Microheater for a Fast Response and High-Sensitive Detection of NO2.

3d Sulfonated Graphene Hydrogel For Enhanced Chemical Sensing

Design of a Dual-Mode Graphene-on-Microring Resonator for Optical Gas Sensing

Nitrogen Dioxide Gas Sensor Based on Ag-Doped Graphene: A First-Principle Study

Si-doped Graphene Nanosheets for NOx Gas Sensing

Impact of Further Thermal Reduction on Few-Layer Reduced Graphene Oxide Film and Its N-P Transition for Gas Sensing

An effective formaldehyde gas sensor based on oxygen-rich three-dimensional graphene

High-Performance No2 Sensors Based On Chemically Modified Graphene

Prototype Alarm Integrating Pulse-Driven Nitrogen Dioxide Sensor Based on Holey Graphene Oxide/In 2 O 3

Highly sensitive graphene ammonia sensor enhanced by concentrated nitric acid treatment