Abstract:Fully ceramic microencapsulated (FCM) fuel is a promising ATF concept with extraordinary fission product inclusion capacity, excellent oxidation and corrosion resistance, and high thermal conductivity. The thermo-mechanical performances are of great significance when evaluating the safety and applicability of a nuclear fuel. In this study, a finite element method (FEM) model for FCM thermo-mechanical performances analysis was presented. The thermo-mechanical behaviors, coupled with irradiation behaviors (including irradiation-induced dimensional change (IIDC), heat generation, conduction, thermal expansion, creep, burnup, and gap/plenum pressure, etc.), were developed to investigate the thermal and mechanical characteristics of TRISO-based FCM Fuel. A simplified model of TRISO fuel particles was established and validated. After that, a full 3D modeling of FCM fuel pellet with typical packing fractions was realized by an optimized stochastic strategy. A numerical method was validated and successfully applied to realize the simulations of a FCM fuel pellet. Two different thermal boundaries, namely fixed particle power and fixed pellet power, were performed to investigate the irradiation behavior of FCM fuel. Moreover, the effects of burnup, particle spacing, no fuel zone width and other key parameters were well studied and investigated. The performed calculation showed that temperature and stress in matrix and TRISO are both positively correlated with the packing fraction. It's worth noting that compared with the cases of fixed particle power, cases of fixed pellet power may lead to higher fuel temperature and higher stress. The results also implied that from the perspective of probability evaluation, most of the TRISO particles in FCM fuel can maintain the structural integrity under different packing fractions, but some of the particles with higher stress may crack or damage, especially in the cases of high burnup and high packing fraction.

Development of A New Pellet-Clad Mechanical Interaction (pcmi) Model and Its Application in Atfs

Simulation on Pellet–Cladding Mechanical Interaction of Accident Tolerant Fuel with Coated Cladding

DEVELOPMENT OF AN ANISOTROPIC MECHANICAL MODEL FOR FROBA CODE AND ITS APPLICATIONS FOR SIC COMPOSITE CLADDING ANALYSIS

Preliminary Neutronic/thermal-Hydraulic Evaluation and Safety System Optimization of PWR Loaded with Fully Ceramic Microencapsulated Fuel

An Evaluation on In-Pile Behaviors of SiCf/SiC Cladding under Normal and Accident Conditions with Updated FROBA-ATF Code

A Comparative Study on Preliminary Performance Evaluation of ATFs under Normal and Accident Conditions with FRAP-ATF Code

A Comparative Study of In-Pile Behaviors of FeCrAl Cladding under Normal and Accident Conditions with Updated FROBA-ATF Code

Numerical Simulation Research on the Irradiation-Thermal-Mechanical Performance Evolution of FCM Fuel

Thermomechanical Modeling of Pellet-Cladding Interaction Using State-Based Peridynamics

Neutronic Design and Evaluation of a PWR Fuel Assembly with Accident Tolerant-Fully Ceramic Micro-Encapsulated (AT-FCM) Fuel

Modeling of Irradiation-Induced Thermo-Mechanical Coupling and Multi-Scale Behavior in a Fully Ceramic-Microencapsulated Fuel Pellet

Numerical simulation of mechanical interaction between pellet and zircaloy-4 cladding under reactivity-initiated accident conditions

Research on Performance Enhancement of Nuclear Fuel with SiC Cladding by Using High Thermal Conductivity Fuels

Development of a Transient Module Based on FROBA-ROD Code and Assessment for Fuel Rod Performance under Reactivity-Initiated Accident

Probabilistic View of SiC/SiC Composite Cladding Failure Based on Full Core Thermo-Mechanical Response

Development of a Thermal–mechanical Behavior Coupling Analysis Code for a Dual-Cooled Annular Fuel Element in PWRs

Monte Carlo simulation of dispersed coated particles in accident tolerant fuel for innovative nuclear reactors

Fuel Performance Optimization of U3Si2-SiC Design During Normal, Power Ramp and RIA Conditions

Investigation on Thermo-Mechanical Performance of Fully Ceramic Microencapsulated Fuel

Multidimensional Multiphysics Modeling of TRISO Particle Fuel with SiC/ZrC Coating Using Modified Fission Gas Release Model

Integrating a Multi-Layer Deformation Model in FRAPTRAN for Accident Tolerant Fuel Analysis