Abstract:This work demonstrates a comprehensive model for horizontal turbulent jet flame geometries under opposing wind, for which few data or models can be found in the literature. This situation can be a practical scenario of offshore drilling platform with a horizontal flare under opposing wind. The opposing wind pushes the jet flame back, which eventually turns around and upwards, pointing finally downstream in the windward direction. The flame geometries are characterized by four parameters including horizontal length and vertical height from nozzle exit to the location of farthest point that flame envelope could reach before the flame turns around as well as horizontal length and vertical height from nozzle exit to the location of flame tip. Experiments are carried out for horizontal jets discharged from circular nozzles having diameters of 3, 5, 7 and 9 mm and employing propane as fuel with opposing wind speeds from 0.35 to 1.08 m/s. The locations of flame tip and the flame farthest point decrease with increasing opposing wind for a constant heat release rate. Dimensional analysis is derived from a physical model considering the momentum of fuel jet, flame buoyancy due to the flame temperature rise, opposing wind momentum and normalized flow rate at stoichiometric conditions at flame tip. The normalized flame geometry parameters based on the proposed model are well represented by two characteristic length scales derived by accounting for the interaction between excess jet-wind momentum and flame buoyancy as well as that between opposing wind momentum and flame buoyancy. In addition, the normalized mass flow rate at stoichiometric conditions determines the total length of flame trajectory. Moreover, an integral model is deduced by an air entrainment model and top hat profiles for the mass and momentum conservations to predict well the flame geometries of horizontal jet fires under opposing wind.

Load Characteristics in Process Modules of Offshore Platforms under Jet Fire: the Numerical Study

Structural Response Analysis of FPSO under Pool Fire

Strength Analysis of a Certain 350 ft Jack-up Offshore Platform Jacking System in Emergency Lifting Process under Different Working Conditions

A Study on a Quantitative Analysis Method for Fire and Explosion Risk Assessment of Offshore Platforms

Numerical Simulation on Dynamic Behaviour of Deepwater J-lay Systems

Probabilistic real-time natural gas jet fire consequence modeling of offshore platforms by hybrid deep learning approach

Experimental and numerical study of gas explosion from semi-submersible platform

Numerical study on the temporal and spatial distribution law of natural gas explosion load on an ultra-deepwater semi-submersible drilling platform

A Grid Based Approach for Fire and Explosion Consequence Analysis

Offshore Structures under Earthquake Loads

NUMERICAL INVESTIGATION OF ABOVE-SEA GAS DISPERSION AND EXPECTED EXPLOSION OVERPRESSURE ON THE OFFSHORE PLATFORM UNDER VARYING SEA AND WEATHER CONDITIONS

Experimental study, dimensional analysis and an integral model for horizontal buoyant turbulent jet fires under opposing wind

Numerical simulation and consequence analysis of accidental hydrogen fires in a conceptual offshore hydrogen production platform

Risk assessment of offshore fire accidents caused by subsea gas release

A fire risk assessment method for offshore platforms: applications of 24Model with BN

Dynamic Behavior of Piled Jacket Offshore Wind Turbines Based on Integrated Aero-Servo-hydro-ssi-owt Model

Wind load simulation and dynamic response analysis on a semi-submersible platform under environmental wind and wave loads

Experimental Study on Tilting Behavior and Blow out of Dual Tandem Jet Flames under Cross Wind

Heat Radiation Research And Optimized Analysis Of Burner Boom On Semi-Submersible Drilling Platform

Dynamic optimisation of evacuation route in the fire scenarios of offshore drilling platforms

Research on mechanical characteristics and safety of working platform in rod pumping process