Abstract:An all-polarization-maintaining (PM) figure-9 mode-locked Tm-doped fiber laser that leverages a nonlinear amplifying loop mirror (NALM) incorporated with a chirped fiber Bragg grating (CFBG) for dispersion management is experimentally demonstrated. A dual output is obtained at the transmission and reflection arm of the NLAM loop, with a center wavelength of 1950 nm and 3 dB bandwidth of, respectively, 8.6 nm and 30 nm. The corresponding pulse repetition rate is 30.6 MHz with an average power of, respectively, 6.5 mW and 2 mW for the two outputted pulses. By utilizing an extra-cavity amplification, the output of the transmission arm experiences nonlinear pulse evolution and its pulse width is directly compressed to 123 fs (almost approaches the calculated Fourier transform limited duration of 114 fs), along with the scaling of the average power to 80 mW. Moreover, through characterizing the noise properties of the laser, it is found that the phase noise, intensity noise and the signal-to-noise ratio (SNR) of the fundamental repetition frequency at the transmission arm manifests a better performance than at the reflection arm. With an integration frequency of [3 kHz, 1 MHz], an optimal timing jitter and relative intensity noise of 164 fs and 0.006 are, respectively, obtained. The noise suppression mechanism is attributed to the interaction between the transmission curve of the NALM and the pulse peak power fluctuations, as well as the dispersion management of the cavity. In addition, the stable operation of the laser is further verified by monitoring the long-term stability.

Single-polarization Noise-Like Pulse Generation from a Hybrid Mode-Locked Thulium-Doped Fiber Laser

All-Polarization Maintaining Noise-Like Pulse From Mode-Locked Thulium-Doped Fiber Laser Based on Nonlinear Loop Mirror

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

1015-1080 Nm Tunable Polarization-Maintaining Dissipative Soliton Mode-Locked Fiber Laser

Q-switched Noise-Like Pulse in a Tm-doped Fiber Laser

Stable noise-like pulse generation from a NALM-based all-PM Tm-doped fiber laser

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

1.7 µm gain-switched and mode-locked hybrid Tm-Ho codoped fiber laser signal generation and optimization

Thulium-doped fluoride mode-locked fiber laser based on nonlinear polarization rotation

Er-doped mode-locked fiber lasers based on nonlinear polarization rotation and nonlinear multimode interference

Quasi-coherent Noise-Like Pulses in a Mode-Locked Fiber Laser with a 3D Rotatable Polarization Beam Splitter

Different types of noise-like pulse in a nonlinear multimodal interference based mode-locked fiber laser

Investigation of noise-like pulse evolution in normal dispersion fiber lasers mode-locked by nonlinear polarization rotation

Hybrid Mode-Locked 2μm Fiber Laser Based on Nonlinear Polarization Rotation and Semiconductor Saturable Absorber Mirror

Yb-doped mode-locked fiber laser with a hybrid structure of NPR and a Lyot filter as the saturable absorber

All-Polarization-Maintaining Figure-9 Mode-Locked Tm-Doped Fiber Laser With Amplitude Noise and Timing Jitter Suppression

Generation of mode-locked noise-like pulses in double-clad Tm-doped fibre laser with nonlinear optical loop mirror

An All Polarization-Maintaining Fiber Laser Mode Locked by Nonlinear Amplifying Loop Mirror with Different Biases

978 Nm All-Polarization-Maintaining Mode-Locked Fiber Laser Based on Phase-Biased Nonlinear Amplifying Loop Mirror

Passively Q-switched mode-locked thulium-doped fiber laser using nonlinear polarization rotation technique

Yb-doped mode-locked fiber laser with a hybrid structure of NPR and Lyot filter as the saturable absorber