Abstract:The ultrafine composite fibers based on the composites of binary fatty acid eutectics and polyethylene terephthalate (PET) with varied fatty acid eutectics/PET mass ratios (50/100, 70/100, 100/100 and 120/100) were fabricated using the technique of electrospinning as form-stable phase change materials (PCMs). The five binary fatty acid eutectics including LA-MA, LA-PA, MA-PA, MA-SA and PA-SA were prepared according to Schrader equation, and then were selected as an innovative type of solid-liquid PCMs. The results characterized by differential scanning calorimeter (DSC) indicated that the prepared binary fatty acid eutectics with low phase transition temperatures and high heat enthalpies for climatic requirements were more suitable for applications in building energy storage. The structural morphologies, thermal energy storage and thermal stability properties of the ultrafine composite fibers were investigated by scanning electron microscope (SEM), DSC and thermogravimetric analysis (TGA), respectively. SEM images revealed that the electrospun binary fatty acid eutectics/PET ultrafine composite fibers possessed the wrinkled surfaces morphologies compared with the neat PET fibers with cylindrical shape and smooth surfaces; the grooves or ridges on the corrugated surface of the ultrafine composite fibers became more and more prominent with increasing fatty acid eutectics amount in the composite fibers. The fibers with the low mass ratio maintained good structural morphologies while the quality became worse when the mass ratio is too high (more than 100/100). DSC measurements suggested that the heat enthalpies of melting and crystallization of the ultrafine composite fibers increased gradually with increasing fatty acid eutectics amounts, but their phase transition temperatures had almost no obvious variation as relative to the corresponding fatty acid eutectics. Meanwhile, the characteristic temperatures and heat enthalpies of the ultrafine composite fibers varied with the different types of binary fatty acid eutectics. TGA results indicated that the degradation of electrospun binary fatty acid eutectics/PET ultrafine composite fibers with representative mass ratio of 100/100 had two steps and corresponded respectively to the degradations of binary fatty acid eutectics and PET polymer chains; and the charred residue at 700 degrees C of the composite fibers was lower than that of the neat PET fibers. It could be envisioned that the electrospun binary fatty acid eutectics/PET composite fibers would be extensively used for latent heat storage in the field of building energy conservation. (C) 2012 Elsevier Ltd. All rights reserved.

Hydroxypropyl Cellulose-Based Esters For Thermal Energy Storage By Grafting With Palmitic-Stearic Binary Acids

Encapsulation of Phase Change Materials Via Interfacial Miniemulsion Polymerization for High Thermal Energy Storage Density

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Synthesis, Characterization and Properties of Palmitic Acid/high Density Polyethylene/graphene Nanoplatelets Composites As Form-Stable Phase Change Materials

Preparation and Properties of Shape-Stabilized Phase Change Materials Based on Fatty Acid Eutectics and Cellulose Composites for Thermal Energy Storage

Expanded waste glass/methyl palmitate/carbon nanofibers as effective shape stabilized and thermal enhanced composite phase change material for thermal energy storage

Biomass-derived polyol esters as sustainable phase change materials for renewable energy storage

Structure, Characterization and Thermal Properties of the Form-Stable Paraffin/High-Density Polyethylene/Expanded Graphite/Epoxy Resin Composite PCMs for Thermal Energy Storage

Form-Stable Phase Change Materials Based on Eutectic Mixture of Tetradecanol and Fatty Acids for Building Energy Storage: Preparation and Performance Analysis

Thermal and mechanical performance assessment of composite (CPCM) for energy storage

Preparation, Characterization and Thermal Properties of Fatty Acid Eutectics/bentonite/expanded Graphite Composites As Novel Form–stable Thermal Energy Storage Materials

Thermal properties and shape-stabilization of poly(propylene-graft-maleic anhydride)-g-alkyl alcohol comb-like polymeric phase change thermal energy storage materials

N-octanoic acid-based phase change composites synthesized by absorption polymerization for efficient thermal energy storage

Fabrication and Performances of New Kind Microencapsulated Phase Change Material Based on Stearic Acid Core and Polycarbonate Shell

Preparation, Morphology and Thermal Properties of Electrospun Fatty Acid Eutectics/polyethylene Terephthalate Form-Stable Phase Change Ultrafine Composite Fibers for Thermal Energy Storage

Thermal properties of phase change materials ionic liquid/fatty acids for thermal energy storage applications

Novel Bio-Based Pomelo Peel Flour/Polyethylene Glycol Composite Phase Change Material for Thermal Energy Storage

Preparation and thermal properties of form-stable palmitic acid/active aluminum oxide composites as phase change materials for latent heat storage

Preparation and characterization of shape-stable bio-based composite phase change materials for thermal energy storage: coconut oil / activated carbon from cherry stones doped composites

Preparation and Thermal Properties of N–octadecane/stearic Acid Eutectic Mixtures with Hexagonal Boron Nitride As Phase Change Materials for Thermal Energy Storage

Synthesis and Characterization of Mixed Alkanes Microcapsules with Phase Change Temperature below Ice Point for Cryogenic Thermal Energy Storage