Abstract:To make a better application of phase change material (PCM) in the thermal management of aerospace systems, this paper investigates effects of the variation of foam-metal pore structure on the thermal performance of composite PCM (CPCM) subjected to different force fields. A two-dimensional numerical model based on the enthalpy-porosity method and the two-temperature energy equation is developed and verified with the experimental data. The thermal behavior of CPCM with different porosities (ω = 20 PPI, ε = 0.91, 0.93, 0.95 and 0.97) and different pore densities (ε = 0.95, ω = 10, 20, 40 and 80 PPI) are investigated under centrifugal acceleration conditions of 0, 5 and -5 g, respectively. A novel index of "end-state isobars" is introduced to describe the melting process of CPCM. The results show that the isotherms of CPCM liquid phase evolve gradually towards the interface parallel to end-state isobars in all conditions. At 0 g, decreasing the porosity effectively improves the thermal conduction of CPCM and slows down the approaching of the isotherms to the end-state isobars. Similarly, increasing the pore density significantly weakens the natural convection of liquid PCM and can also slows down the approaching isotherms to the end-state isobars. At 5 g, the isotherms can match exactly with the end-state isobars, after which the heat transfer process mainly depends on conductive. And decreasing the porosity can significantly improve the thermal performance of CPCM, while adjusting the pore density has almost no effect. At -5 g, the natural convection strength of CPCM is enhanced, changing porosity has limited effect on the heat transfer performance of CPCM, while decreasing pore density can significantly enhance the heat transfer performance. The results may provide some valuable reference for the evaluation and design of latent heat thermal energy storage (LHTES) system suitable to the aerospace field.

Investigating the Impact of Cp-T Values Determined by DSC on the PCM-CFD Model

Sensitivity Analysis Of Thermophysical Properties On Pcm Selection Under Steady And Fluctuating Heat Sources: A Comparative Study

Experimental Validation of an Air-Pcm Storage Unit Comparing the Effective Heat Capacity and Enthalpy Methods Through CFD Simulations

Evaluation of PCM Thermophysical Properties on a Compressed Air Energy Storage System Integrated with Packed-Bed Latent Thermal Energy Storage

Modeling and experimental validation of the thermal behavior of PCM using DSC input data

Calibration of differential scanning calorimeter (DSC) for thermal properties analysis of phase change material

Experimental Study on the Thermal Performance of Air-Pcm Unit

Consistent DSC and TGA Methodology as Basis for the Measurement and Comparison of Thermo-Physical Properties of Phase Change Materials

Effect of Thermophysical Properties Correlation of Phase Change Material on Numerical Modelling of Agricultural Building

Numerical study on the thermal performance of foam-metal composite phase change material in different force fields

Metrology based on transient heat transfer theory for evaluating phase change materials with differential scanning calorimetry

Analysis of Thermal Physical Properties Testing Method of Phase Change Materials

Study on thermal properties of phase change material by an optical DSC system

CFD analysis on heat transfer in a building wall using Phase Change Materials (PCM)

Optimization of the Phase-Change Wallboard Test Method: Experimental and Numerical Investigation

Effective Thermal Conductivity Measurement of PCM Composites During Phase Transition by Using the Transient Plane Source Method

Fluid Flow and Heat Transfer in a Latent Thermal Energy Unit with Different Phase Change Material (PCM) Cavity Volume Fractions

Analysis of Melting Dynamics and Parametric Optimization in Encapsulated Phase Change Materials for Thermal Energy Storage

Thermal performance assessment of phase change material for electronic cooling: An experimental investigation

Heat Transfer of Composite Phase Change Material Modules Containing a Eutectic Carbonate Salt for Medium and High Temperature Thermal Energy Storage Applications

New View Point on the Effect of Thermal Conductivity on Phase Change Materials Based on Novel Concepts of Relative Depth of Activation and Time Rate of Activation: the Case Study on a Top Floor Room