Abstract:A depth encoding PET detector module using semi-monolithic scintillation crystal single-ended readout by a SiPM array was built and its performance was measured. The semi-monolithic scintillator detector consists of 11 polished LYSO slices measuring 1 × 11.6 × 10 mm3. The slices are glued together with enhanced specular reflector (ESR) in between and outside of the slices. The bottom surface of the slices is coupled to a 4 × 4 SiPM array with a 1 mm light guide and silicon grease between them. No reflector is used on the top surface and two sides of the slices to reduce the scintillation photon reflection. The signals of the 4 × 4 SiPM array are grouped along rows and columns separately into eight signals. Four SiPM column signals are used to identify the slices according to the center of the gravity of the scintillation photon distribution in the pixelated direction. Four SiPM row signals are used to estimate the y (monolithic direction) and z (depth of interaction) positions according to the center of the gravity and the width of the scintillation photon distribution in the monolithic direction, respectively. The detector was measured with 1 mm sampling interval in both the y and z directions with electronic collimation by using a 0.25 mm diameter 22Na point source and a 1 × 1 × 20 mm3 LYSO crystal detector. An average slice based energy resolution of 14.9% was obtained. All slices of 1 mm thick were clearly resolved and a detector with even thinner slices could be used. The y positions calculated with the center of gravity method are different for interactions happening at the same y, but different z positions due to depth dependent edge effects. The least-square minimization and the maximum likelihood positioning algorithms were developed and both methods improved the spatial resolution at the edges of the detector as compared with the center of gravity method. A mean absolute error (MAE) which is defined as the probability-weighted mean of the absolute value of the positioning error is used to evaluate the spatial resolution. An average MAE spatial resolution of ~1.15 mm was obtained in both y and z directions without rejection of the multiple scattering events. The average MAE spatial resolution was ~0.7 mm in both y and z directions after the multiple scattering events were rejected. The timing resolution of the detector is 575 ps. In the next step, long rectangle detector will be built to reduce edge effects and improve the spatial resolution of the semi-monolithic detector. Thick detector up to 20 mm will be explored and the positioning algorithms will be further optimized.

NaI(Tl) Scintillator Read out with SiPM Array for Gamma Spectrometer

A Compact Dual Gamma Neutron Detector Based on NaI(Tl+Li) Scintillator Readout with SiPM

Scintillation detectors constructed with an optimized 2x2 silicon photomultiplier array

NaI gamma camera performance for high energies: Effects of crystal thickness, photomultiplier tube geometry and light guide thickness

Design and manufacture of scintillation detector using CsI(Tl) crystal coupled with silicon photomultipliers

In-silico optimisation of tileable philips digital SiPM based thin monolithic scintillator detectors for SPECT applications

Growth and Evaluation of Improved CsI:Tl and NaI:Tl Scintillators

A New Compact Position-Sensitive PMT for Scintillation Detectors

Replacement of a Photomultiplier Tube with Silicon Photomultipliers for use in Safeguards Applications

Performance of a SiPM Based Semi-Monolithic Scintillator PET Detector

Position-sensitive NaI(TL) detector module for large-area Compton camera

Novel light-guide-PMT geometries to reduce dead edges of a scintillation camera

Experimental Validation of a Gamma Detector With a Novel Light-Guide-PMT Geometry to Reduce Dead Edge Effects

First operation of undoped CsI directly coupled with SiPMs at 77 Kelvin

A Novel High Dynamic-Range SiPM for Scintillator-Based Hadronic Calorimetry

Self-Contained, Cooled SiPM Array for Scintillation Spectroscopy

Direct Comparison of SiPM and PMT Sensor Performances in a large-size imaging air Cherenkov telescope

A section of a curved pixelated NaI(Tl) detector for SPECT/TCT

Calculation of efficiency and resolution of a hexagonal NaI(Tl) detector as a function of source position

Nanosecond and Highly Sensitive Scintillator Based on All-Inorganic Perovskite Single Crystals