Abstract:Prediction and manipulation of the evaporation of small droplets is a fundamental problem with importance in a variety of microfluidic, microfabrication, and biomedical applications. A vapor-diffusion-based model has been widely employed to predict the interfacial evaporation rate; however, its scope of applicability is limited due to incorporation of a number of simplifying assumptions of the physical behavior. Two key transport mechanisms besides vapor diffusion-evaporative cooling and natural convection in the surrounding gas-are investigated here as a function of the substrate wettability using an augmented droplet evaporation model. Three regimes are distinguished by the instantaneous contact angle (CA). In Regime I (CA ≲ 60°), the flat droplet shape results in a small thermal resistance between the liquid-vapor interface and substrate, which mitigates the effect of evaporative cooling; upward gas-phase natural convection enhances evaporation. In Regime II (60 ≲ CA ≲ 90°), evaporative cooling at the interface suppresses evaporation with increasing contact angle and counterbalances the gas-phase convection enhancement. Because effects of the evaporative cooling and gas-phase convection mechanisms largely neutralize each other, the vapor-diffusion-based model can predict the overall evaporation rates in this regime. In Regime III (CA ≳ 90°), evaporative cooling suppresses the evaporation rate significantly and reverses entirely the direction of natural convection induced by vapor concentration gradients in the gas phase. Delineation of these counteracting mechanisms reconciles previous debate (founded on single-surface experiments or models that consider only a subset of the governing transport mechanisms) regarding the applicability of the classic vapor-diffusion model. The vapor diffusion-based model cannot predict the local evaporation flux along the interface for high contact angle (CA ≥ 90°) when evaporative cooling is strong and the temperature gradient along the interface determines the peak local evaporation flux.

WETTING BEHAVIOR OF WATER MICRODROPLETS IN NATURAL EVAPORATION

CONTACT ANGLE VARIATION IN WATER DROPLETS ON LOW-SURFACE-ENERGY SOLIDS

EFFECT OF SOLID SURFACE PROPERTY ON GEOMETRIC VARIATIONS OF MICRO- TO MILLIMETER-SIZED WATER DROPLETS DURING VOLUME REDUCTION PROCESS

Experimental and Theoretical Investigation of Contact-Angle Variation for Water–ethanol Mixture Droplets on a Low-Surface-energy Solid

J0230203 Analytical consideration of droplet wettability on solid surfaces

Wettability Model for Various-Sized Droplets on Solid Surfaces

Theoretical Model of Droplet Wettability on a Low-Surface-Energy Solid under the Influence of Gravity

Simple relations for wettability of a droplet on a low-surface-energy solid

Wettability Model for Water-Ethanol Binary Mixture Droplet on Roughened Low-Surface-energy Solids

Universality of Droplet Impingement: Low-to-High Viscosities and Surface Tensions

Macroscopic Wettability Based on an Interfacial Jump Condition.

On-demand Evaporation Mode of Sessile Droplet by Designing Substrate Surface Wettability Patterns

STUDY ON A MECHANICAL EQUILIBRIUM CONDITION AT A THREE-PHASE CONTACT LINE: WETTABILITY ON SOLID SURFACES

Analytical Consideration of Liquid Droplet Impingement on Solid Surfaces

Experimental Correlation for Splashing Condition of Droplets on Solid Substrates

Experimental investigation on variations in geometric variables of a droplet on a low-surface-energy solid

Characterizing the Thermal Transport and Kinetics of Droplet Evaporation on a Solid Surface with Hybrid Wettability

Discussion on a Mechanical Equilibrium Condition of a Sessile Drop on a Smooth Solid Surface

Influence of surface wettability on transport mechanisms governing water droplet evaporation

Evaporation of tiny water aggregation on solid surfaces of different wetting properties

Evaporation-Induced Wetting Transition of Nanodroplets on Nanopatterned Surfaces with Concentric Rings: Surface Geometry and Wettability Effects.