Abstract:Here, the authors introduce twin‐wire sensor networks for enabling high‐density 4‐wire sensing systems which are more efficient in terms of wires, pads, and interconnections. After systematically discussing the design of the sensor network and its electronic interface, a twin‐wire 29‐temperature‐sensors network with only 32 pads is shown. These strategies can be especially important for robotics and wearable or epidermal devices. A fundamental limit to high‐density sensing is that adding sensors increases the number of wires, pads, and interconnections. This problem is even worse for low‐values resistive or impedance sensors which, for high accuracy, require 4‐wire measurements. Here, twin‐wire sensor networks are described which enable 4‐wire measurements with significantly fewer wires, pads, and interconnections. The effects of the resistor noise can be minimized by minimum‐resistance sensing paths. A single chopper switch and straightforward digital operations can reject the equivalent input offset and low‐frequency noise voltages of the instrumentation amplifier, thus requiring no hardware changes. The inclusion in the network of a reference resistor can compensate the errors of both the biasing current and the instrumentation amplifier voltage gain. For validation, an extremely compact, robust, and easy‐to‐connect flexible‐PCB twin‐wire 29‐temperature‐sensors network requiring only 32 pads is demonstrated. This device is placed on an anthropomorphic head phantom for detecting the temperature and location of a touching object or on the hand of a volunteer for monitoring skin temperature during mental and physical stimulations. A twin‐wire 29‐photoresistors network is also presented. The strategies reported here can be applied to any high‐density array of resistive or impedance sensors (temperature, strain, blood flow, light, etc.) and may find wide application in robotics and wearable or epidermal devices.

To save half contact pads in 2D mapping of local temperatures with a thermocouple array

Twin‐Wire Sensor Networks

Real-Time Two-Dimensional Mapping of Relative Local Surface Temperatures with a Thin-Film Sensor Array

Towards on-chip time-resolved thermal mapping with micro-/nanosensor arrays

Thin-Film Thermocouple Array for Time-Resolved Local Temperature Mapping

A Flexible Capacitive Tactile Sensor Array with High Scanning Speed for Distributed Contact Force Measurements

A High-Precision Three-Dimensional Probe Array Temperature Sensor

Highly Precise Multifunctional Thermal Management-Based Flexible Sensing Sheets

A High-Resolution, Ultrabroad-Range and Sensitive Capacitive Tactile Sensor Based on a CNT/PDMS Composite for Robotic Hands.

Printed temperature sensor array for high-resolution thermal mapping

Precise nanoscale temperature mapping in operational microelectronic devices by use of a phase change material

Flexible integrated sensor with asymmetric structure for simultaneously 3D tactile and thermal sensing

Ultra-sensitive and precisely decoupled pressure and temperature detection with a "soft-hard" asymmetrically structured sensor based on carbon-nanocoils

Flexible Dual‐Parameter Sensor Array without Coupling Based on Amorphous Indium Gallium Zinc Oxide Thin Film Transistors

Key Issues in Microscale Temperature Sensing with Thermocouple Array

Temperature-controllable electrodes with a one-parameter calibration.

Flexible Miniaturized Thin Film Thermocouples Arrays for High Temperature Applications

Development of the Backside Loading Inductive Tactile Force Sensor Using the Flip-Chip Bonding of CMOS Sensing Chip

A 72-Channel Resistive-and-Capacitive Sensor-Interface Chip With Noise-Orthogonalizing and Pad-Sharing Techniques

Multifunctional Thermoelectric Temperature Sensor for Noncontact Information Transfer and Tactile Sensing in Human‐Machine Interaction

Optimization of a Wearable Device for Core Body Temperature Monitoring Based on the Dual-Heat-Flux Model