Abstract:An in vitro simulation test using a designed well-targeted test rig has been regarded as an effective way to understand the kinematics and dynamics of the foot and ankle complex in the dynamic stance phase, and it also allows alterations in both internal and external control compared to in vivo tests. However, current simulators are limited by some assumptions. In this study, a novel foot and ankle bionic dynamic simulator was developed and validated. A movable 6-degree-of-freedom parallel mechanism, known as Steward platform, was used as the core structure to drive the tibia, with a tibial force actuator applied with different loads. Four major muscle groups were actuated by four sensored pulling cables connected to muscle tendons. Simulation processes were controlled using a software developed based on a proportional-integral-derivative control loop, with tension-compression sensors mounted on tendon pulling cables and used as real-time monitor signals. An iterative learning module for tibial force control was integrated into the control software. Six specimens of the cadaveric foot-ankle were used to validate the simulator. The stance phase was successfully simulated within 5 s, and the tibia loads were applied based on the body weight of the cadaveric specimen donors. Typical three-dimensional ground reaction forces were successfully reproduced. The coefficient of multiple correlation analysis demonstrated good repeatability of the dynamic simulator for the ground reaction force (coefficient of multiple correlation > 0.89) and the range of ankle motion (coefficient of multiple correlation > 0.87 with only one exception). The simulated ranges of the foot-ankle joint rotation in stance were consistent with in vivo measurements, indicating the success of the dynamic simulation process. The proposed dynamic simulator can enhance the understanding of the mechanism of the foot-ankle movement, related injury prevention, and surgical intervention.

Simulation Analysis of Bionic Auxiliary Device for Ankle Rehabilitation Based on RecurDyn

Three-Dimensional Human Modeling and Dynamics Simulation Based on ADAMS

Design and validation of a foot-ankle dynamic simulator with a 6-degree-of-freedom parallel mechanism

Design and Performance Evaluation of a Novel Wearable Parallel Mechanism for Ankle Rehabilitation

Design and Experimental Research of 3-RRS Parallel Ankle Rehabilitation Robot

Analysis and optimization design of motion characteristics for a 3- P UU/ R parallel ankle joint rehabilitation mechanism

Design of a Flexible Bionic Ankle Prosthesis Based on Subject-specific Modeling of the Human Musculoskeletal System

Dynamics Analysis and Simulation of a New 6-DOF Lower Limb Rehabilitation Robot

Intelligent ankle–foot prosthesis based on human structure and motion bionics

Kinematics Simulation Analysis of a Kind of Pedal Rehabilitation Robot

Configuration and Kinematics of a 3-DOF Generalized Spherical Parallel Mechanism for Ankle Rehabilitation

Dynamic analysis and design of a multipurpose lower limb exoskeleton for rehabilitation

Combined kinematic and static analysis of an articulated lower limb traction device for a rehabilitation robotic system

An ankle rehabilitation robot based on 3-RRS spherical parallel mechanism

A Multiaxial Bionic Ankle Based on Series Elastic Actuation With a Parallel Spring

A New Ankle Robotic System Enabling Whole-Stage Compliance Rehabilitation Training

Design and Optimization of the New Cable-Driven Ankle Rehabilitation Equipment

Concept and Prototype Design of A Robotic Ankle-foot Rehabilitation System with Passive Mechanism for Coupling Motion

Design, Simulation and Kinematic Validation of a Hip Prosthetic Mechanism with a Multimotor Function

Development of an STS map of an interspecific progeny of Malus

ANKLE ACTUATION FOR THREE-DIMENSIONAL LIMIT CYCLE WALKERS IN LATERAL BALANCE