Abstract:1. Srx(Zr0.9Y0.05Yb0.05)O1.95+x‐NiCoCrAlY thermal barrier coatings (TBCs) [SZYY‐1, x = 1.0; SZYY‐2, x = 0.9; SZYY‐3, x = 0.8] were deposited by suspension plasma spraying (SPS) using the corresponding precursors suspension prepared by co‐precipitation. 2. SPS‐SZYY‐2 with columnar crystal structure was found to have the highest number of 1121°C‐1 h high‐temperature thermal cycling, up to 345 times. 3. The effects of microstructure and phase composition on thermal cycling failure of the coating at high temperatures were studied in detail. A finite element model was also proposed to evaluate the thermal stress thermally grown oxide (TGO) morphology of a real coating at different thermal cycling stages. The thermal barrier coatings (TBCs) consisting of Srx(Zr0.9Y0.05Yb0.05)O1.95+x were prepared using the suspension plasma spraying (SPS) method. Precursor suspensions were prepared via co‐precipitation for this purpose. Detailed microstructural, phase composition, and phase content analyses were conducted on these coatings, designated as SZYY‐1 (x = 1.0), SZYY‐2 (x = 0.9), and SZYY‐3 (x = 0.8). Additionally, the coatings underwent a thermal cycling test at 1121°C for 1 h. To assess the morphology of thermally grown oxide (TGO) in a real coating, a finite element model was employed. SPS‐SZYY‐2 with columnar crystal structure was found to have the highest number of thermal cycling, up to 345 times. The thermophysical high‐temperature properties of the coating can be effectively improved through suitable second‐phase content. Microstructural and finite element analyses revealed that stress, primarily caused by the continuous growth of the Co3O4, NiO and Spinel (CNS) layer within TGO, was the predominant factor leading to coating failure. At elevated temperatures, transverse cracks formed at the interface between the bond coating and ceramic top coating due to mismatched thermal expansion and sintering effects, ultimately leading to coating degradation. Therefore, reducing the generation rate of large stresses in the coating, especially shear stresses, can effectively prevent the generation and propagation of transverse cracks and increase the thermal cycling life of TBCs.

The Study of High Temperature Oxidation Performance of Thermal Barrier Coatings Prepared by Plasma Spraying and Laser Remelting

Thermal stability of nanostructured 13wt% Al2O3–8wt% Y2O3–ZrO2 thermal barrier coatings

Effect of Sc2O3 Doping on YSZ TBCs: Morphologies, Phase Composition, Mechanical Properties, and High-Temperature Oxidation Resistance

Thermal Failure of Nanostructured Thermal Barrier Coatings with Cold Sprayed Nanostructured NiCrAlY Bond Coat

Microstructure, Thermal Conductivity and Thermal Cycling Behavior of Thermal Barrier Coatings Prepared by Plasma Spray Physical Vapor Deposition

An investigation on the microstructure and oxidation behavior of laser remelted air plasma sprayed thermal barrier coatings

Assessment of the Performance of Y2SiO5-YSZ/YSZ Double-Layered Thermal Barrier Coatings

Thermal properties of plasma-sprayed thermal barrier coating with bimodal structure

Thermal cycling behavior of Srx(Zr0.9Y0.05Yb0.05)O1.95+x thermal barrier coatings by suspension plasma spraying

Isothermal Oxidation Properties of YAG/8YSZ Double Ceramic Thermal Barrier Coatings

Phase Transformation Behavior in Air Plasma Sprayed Yttria Stabilized Zirconia Coating

Phase transitions and microstructure evolutions of in-situ YSZ-ZrC composite coating under long-time plasma torch ablation

Phase Stability, Fracture Toughness and Thermal Cycling Behavior of Supersonic Suspension Plasma Sprayed Scandia-Yttria Co-doped Zirconia Thermal Barrier Coatings

Deposition Characteristics, Sintering and Cmas Corrosion Resistance, and Mechanical Properties of Thermal Barrier Coatings by Atmospheric Plasma Spraying

Surface Microstructure and High Temperature Oxidation Resistance of Thermal Sprayed CoCrAlY Coating Irradiated by High Current Pulsed Electron Beam

A study on the thermal cyclic behavior of NiCrAlY coatings via femtosecond laser remelting with high repetition rate

Oxidation behavior of laser remelted plasma sprayed NiCrAlY and NiCrAlY–Al2O3 coatings

High-temperature Oxidation of Sprayed Alumina and Zirconium‑yttrium-Based Coatings on Zircaloy-4 in Air and Oxygen: Investigation on Microstructure Evolution and Phase Changes

Preparation and High-Temperature Performance of Sc2O3-Y2O3 Co-Stabilized ZrO2 Thermal Barrier Coatings

A comparative study on the performance of suspension plasma sprayed thermal barrier coatings with different bond coat systems

Preparation and Solid Particle Erosion Behaviors of Plasma-Sprayed and Laser-Remelted ZrO2-7wt.%Y2O3 Thermal Barrier Coatings