Abstract:Journal of Intelligent Material Systems and Structures, Ahead of Print. In order to meet the requirements of high frequency, high precision, and micro-scale dispensing in the field of microelectronics packaging, a piezoelectric jetting dispensing valve based on two-stage displacement amplifying mechanism was proposed. First, the overall structure and working principle of the proposed piezoelectric jetting valve were described. The displacement amplifying mechanism was designed, and the mathematical relationship between the output displacement and the structural parameters was established. In addition, the performance and the structural size of the displacement amplifying mechanism were analyzed and optimized by using the finite element analysis software. The influences of driving pressure, glue viscosity, needle displacement, and other parameters on droplet diameter and jetting velocity in the process of dispensing were simulated and analyzed. In order to obtain the optimal nozzle structure, the changing curves of glue flowing velocity with different nozzle seal forms, nozzle cone angles, and outlet inner diameters were compared and analyzed. Finally, the prototype of the piezoelectric jetting dispensing valve was machined, and experimental study was performed. The influence laws of driving pressure, glue viscosity, driving voltage, and other parameters on the diameter of droplet were explored. The performance of the prototype was evaluated from three aspects of dispensing frequency, consistency, and minimum dispensing droplet diameter. Results show that the highest dispensing frequency is 230 Hz, the deviation of dispensing consistency is ±8.77%, and the minimum dispensing droplet diameter is 0.54 mm. The experimental results verify the high frequency, consistency, and micro-scale dispensing performance of the piezoelectric jetting dispensing valve based on the displacement amplifying mechanism, which provides a reference for the research of piezoelectric high-frequency jetting dispensing.

Effects of Structural Sizes on the Injection Performances of Piezoelectric Micro-Jet

The Numerical and Experimental Research on Injection Performance of Piezoelectric Micro-Jet

Influences of Fluid Characteristics on Piezoelectric Micro-Jet Based on Direct Coupling Method

Research on the Acoustic-Structure Coupling Characteristics of a Piezoelectric Micro-Jet Used for Lubricating.

Influences of Excitation on Dynamic Characteristics of Piezoelectric Micro-Jets

Comparative Influences of Fluid and Shell on Modeled Ejection Performance of a Piezoelectric Micro-Jet

Structural Design and Performance of a Jet-Impinging Type Microbubble Generator

Influences Of Excitation On Droplet Spreading Characteristics Ejected By Piezoelectric Micro-Jet

Effect of Added Mass on the Working Frequency of Slapping Mode Piezoelectric Micro-Jet

Droplet Jetting of Piezoelectric Printhead and Corresponding Effect Factors

Influence of input signal on injection performance for needle driven piezoelectric micro-jet device

Injection of Viscous Micro-Droplet via Nozzle-Driven Piezoelectric Micro-Jet and Its Performance Control Method

Design and performance analysis of a piezoelectric jetting dispensing valve

A Fluid-Solid Coupling Modal Analysis of Piezoelectrically Actuated Microjet and the Frequency Design of Nozzles Layout

Effects of Pulse Voltage on Piezoelectric Micro-Jet for Lubrication

Effects of piezoelectric synthetic jet actuator parameters on synthetic jet formation process and actuator performance

Acoustic Simulation of the Slapping Mode of Piezoelectric Micro-Jet

Research on the Injection Performance of a Novel Lubricating Device Based on Piezoelectric Micro-Jet Technology

The Effect of Nozzle Layout on Droplet Ejection of a Piezo-Electrically Actuated Micro-Atomizer

Design and characteristic analysis of a piezoelectric micro-jet generator

Experimental study on ultrasonic injection nozzle