Abstract:Journal of Intelligent Material Systems and Structures, Ahead of Print. In order to meet the requirements of high frequency, high precision, and micro-scale dispensing in the field of microelectronics packaging, a piezoelectric jetting dispensing valve based on two-stage displacement amplifying mechanism was proposed. First, the overall structure and working principle of the proposed piezoelectric jetting valve were described. The displacement amplifying mechanism was designed, and the mathematical relationship between the output displacement and the structural parameters was established. In addition, the performance and the structural size of the displacement amplifying mechanism were analyzed and optimized by using the finite element analysis software. The influences of driving pressure, glue viscosity, needle displacement, and other parameters on droplet diameter and jetting velocity in the process of dispensing were simulated and analyzed. In order to obtain the optimal nozzle structure, the changing curves of glue flowing velocity with different nozzle seal forms, nozzle cone angles, and outlet inner diameters were compared and analyzed. Finally, the prototype of the piezoelectric jetting dispensing valve was machined, and experimental study was performed. The influence laws of driving pressure, glue viscosity, driving voltage, and other parameters on the diameter of droplet were explored. The performance of the prototype was evaluated from three aspects of dispensing frequency, consistency, and minimum dispensing droplet diameter. Results show that the highest dispensing frequency is 230 Hz, the deviation of dispensing consistency is ±8.77%, and the minimum dispensing droplet diameter is 0.54 mm. The experimental results verify the high frequency, consistency, and micro-scale dispensing performance of the piezoelectric jetting dispensing valve based on the displacement amplifying mechanism, which provides a reference for the research of piezoelectric high-frequency jetting dispensing.

Influences of Fluid Characteristics on Piezoelectric Micro-Jet Based on Direct Coupling Method

Influences of Excitation on Dynamic Characteristics of Piezoelectric Micro-Jets

Coupled Electrostatic-Structures-Fluidic Analysis of a Nozzle/Diffuser Diaphragm Micropump

Droplet Jetting of Piezoelectric Printhead and Corresponding Effect Factors

Injection of Viscous Micro-Droplet via Nozzle-Driven Piezoelectric Micro-Jet and Its Performance Control Method

Influence of input signal on injection performance for needle driven piezoelectric micro-jet device

Design and Fabrication of A Piezoelectric Bend Mode Drop-On-Demand Inkjet Printhead with Interchangeable Nozzle

The Design and Evaluation of a High-Speed Jet Dispenser Driven by Single Piezoelectric Stack

A Fluid-Solid Coupling Modal Analysis of Piezoelectrically Actuated Microjet and the Frequency Design of Nozzles Layout

Electric Field-Assisted Droplet Formation Using Piezoactuation-Based Drop-On-Demand Inkjet Printing

Design of Piezoelectric Micro-Droplet Injector

Design and performance analysis of a piezoelectric jetting dispensing valve

The Characteristics of a Piezoelectrically Actuated Micro Jet

Deformation characteristics of a single droplet driven by a piezoelectric nozzle of the drop-on-demand inkjet system

Fluid-Solid Coupled Characteristics Of Piezo-Electrically Actuated Micro-Droplet Generator

Design and Experiment of a Solder Paste Jetting System Driven by a Piezoelectric Stack

Numerical Simulation of Micro Droplet Formation Combined with Pneumatic and Piezoelectric Drive

Piezoelectric micro-jet devices: A review

Mathematical Model of Piezoelectric Actuated Micro-droplet Jetting Process

The Jetting Process and Spreading Characteristics of the Power-Law Fluids for Material Jetting Process

Design and performance analysis of an embedded amplified piezoelectric jetting dispensing valve