Abstract:The silicon carbide (SiC) power module is one of the most popular semiconductor devices in industrial applications with the enhanced current rating. In this paper, a 1200-V/200-A SiC three-level (3L) module with neutral point clamped (NPC) topology is designed and validated. Compared with other existing works, the drain current of the designed module is accurately measured by a custom-made current transformer (CT) combined with a commercially off-the-shelf current probe (CP), which is critical for power loss evaluation. Based on the simulation and experiment results, it can be found that the maximum internal commutation loop stray inductance is no more than 40 nH, and the total switching loss can be reduced more than 30$\%$ compared with the hybrid 3L NPC module (Si IGBTs+SiC SBDs). Meanwhile, the power loss evaluation demonstrates that the designed 3L NPC module with all-SiC device is more suitable for high-voltage and high-frequency applications compared with its 2L counterpart, and the thermal simulation shows that the maximum junction temperature is less than 120 ${}^{\circ }$C when the module operates as a buck converter with $V_{DC}$ = 600 V, $I_{o}$ = 150 A, and $f_{s}$ = 100 kHz. In addition, compared with the 2L module, the 3L one presents enhanced spectrum amplitude in the high frequency (HF) range ($\ge$ 10 MHz) for the high-voltage applications, which indicates higher electromagnetic interference (EMI) noise. Then, two types of sunbber circuits are used to suppress the HF oscillation of the SiC 3L NPC module and alleviate the EMI noise as well according to the experiment results.

A 1200V/100A all-SiC power module for boost converter of EV/HEV's motor driver application

Dynamic Performance of 6.5kv/400a SiC MOSFET Module and Its Gate Driver

Comparative Study on Reliability and Application Features of SiC MOSFET

Technical approaches towards ultra-high power density SiC inverter in electric vehicle applications

High Temperature Direct Double Side Cooled Inverter Module for Hybrid Electric Vehicle Application

An All-SiC 15 kW/L 60 kW Multiplexing Converter for Electric Vehicles

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

3.38 Mhz Operation of 1.2kv SiC MOSFET with Integrated Ultra-Fast Gate Drive

High-voltage full-SiC power module: Device fabrication, testing and high frequency application in kW-level converter

Investigation of Low-Profile, High-Performance 62-mm SiC Power Module Package

Fabrication and testing of 3500V/15A SiC JFET based power module for high-voltage, high-frequency applications

Design and Application of A 1200v Ultra-Fast Integrated Silicon Carbide Mosfet Module

Design and Evaluation of a 1200-V/200-A SiC Three-Level NPC Power Module

A 100kW Forced-Air-Cooled SiC MOSFET Converter Achieving a Power Density of 1.657kW/L and an Efficiency over 98.5%

Design and Current Balancing Optimization of A 1700V/1000A Multi-chip SiC Power Module

Optimal Design of SiC MOSFETs for 20kw DCDC Converter

Design of a 10 kV SiC MOSFET-based high-density, high-efficiency, modular medium-voltage power converter

A 1200-V, 60-A SiC MOSFET Multichip Phase-Leg Module for High-Temperature, High-Frequency Applications

Design and Application of High-Voltage SiC JFET and Its Power Modules

A 10kV/200A SiC MOSFET module with series-parallel hybrid connection