Abstract:Advances in Mechanical Engineering, Volume 16, Issue 9, September 2024. As urbanization continues to accelerate, dump trucks assume an increasingly important role in the transportation and construction of infrastructure. The carriage represents a critical structural assembly of dump trucks. One of the primary failure modes of the carriage is weld fatigue failure, which frequently gives rise to the problem of weld fatigue cracking during transportation. To increase the fatigue life of welds and enhance the degree of structural lightweight of a heavy dump truck carriage, a method for anti-fatigue lightweight design based on machine learning and multi-objective optimization is proposed. A high-fidelity finite element model of the carriage is established for static simulation analysis of the typical conditions. Based on the virtual reliability simulation test of the dump truck and the equivalent structural stress method, the fatigue life of the critical welds in the carriage is calculated. The important part thicknesses are selected as design variables through the comprehensive contribution analysis method. The maximum displacement and maximum stress under the dangerous condition are considered as constraints. The mass of the carriage and the minimum fatigue life of the critical welds are considered as optimization objectives. The GA-XGBoost machine learning approximation models (GA-XGBoost-MLAM) and NSGA-II algorithm are employed for multi-objective optimization design of the carriage. The entropy weighted TOPSIS method is utilized for multi-objective decision-making of Pareto solutions. The design after optimization and decision-making shows that, while satisfying the requirements of static structural performance, the minimum fatigue life mileage of the critical welds of the carriage is increased by 157,570 km, representing an increase of 36.58%. Additionally, the mass of the carriage is reduced by 295.69 kg, representing a decrease of 9.47%. Therefore, the proposed design method achieves a good effect in the anti-fatigue lightweight of dump truck carriage.

Energy-absorption Optimisation of Locomotives and Scaled Equivalent Model Validation

Interpretable Machine-Learning Models for Maximum Displacements of RC Beams under Impact Loading Predictions

Crash energy management optimization of high-speed trains by machine learning methods

Multistage Impact Energy Distribution for Whole Vehicles in High-Speed Train Collisions: Modeling and Solution Methodology

Train energy simulation with locomotive adhesion model

Frontal crashworthiness structure analysis and optimization of electric vehicle

Load Modeling of CRH3 Electric Multiple Unit Traction Drive System

The Lateral Modeling and Parameter Optimization Based on Vehicle-Track Coupled Dynamics for a Special Railway Vehicle

Lateral Dynamic Model for Full-Size Semi-Trailer Container Trucks with Practical Evaluation

Numerical and experimental study on the design strategy of a new collapse zone structure for railway vehicles

Optimization on the Crosswind Stability of Trains Using Neural Network Surrogate Model

Damping Coefficient Optimization for the Articulated System of Virtual Track Trains

Design and Mechanical Properties Analysis of Variable Buffer-Force Planing Energy-Absorbing Device for Rail Vehicles

Optimisation of an inter-vehicle damper for a high-speed train

F-6-2-2 Crashworthiness Simulation and Structural Optimization of Commercial Vehicle

Evaluation of coupled finite element/meshfree method for a robust full-scale crashworthiness simulation of railway vehicles

A validated railway vehicle interior layout with multibody dummies and finite element seats models for crash analysis

Machine learning-based crashworthiness optimization for the square cone energy-absorbing structure of the subway vehicle

A Wave Propagation Model of Distributed Energy Absorption System for Trains

Multi-objective optimization design for anti-fatigue lightweight of dump truck carriage combined with machine learning