Abstract:Affected by the influence of the attitude variation and vibration of the satellite platform in the process of tracking and pointing,free space optical communication terminal will therefore reduce the tracking precision of the system.In order to improve the system's ability for the purpose of resisting disturbance,on the basis of coarse tracking system,the cascade linear active disturbance rejection controller was put forward.The coarse tracking system used direct current brushless torque motor driving two-dimensional turntable as the actuator,and was controlled by the coarse tracking controller.Analysis of the system disturbance is required,for which the tracking differentiator is applied to extract.With azimuth axis of the two-dimensional turntable as the object,the cascade linear active disturbance rejection controller was applied to position loop and speed loop for the sack of active disturbance compensation through linear extended state observer.Therefore,double isolation of internal and external loop disturbance can be achieved,and the tracking precision shall be improved.The experimental analysis,and a comparison with the proportion integral derivation controller were also included.The research results show that there is a 50％ decrease of standard deviation referred to the tracking error,when inputting 2 Hz,5 Hz and 8 Hz sinusoidal signals with the same disturbance signal simulation.At the same time,the observer's disturbance compensation effect in the circumstance of linear expansion was verified.A high tracking accuracy is still ensured when active disturbance rejection control is not sensitive to the frequency variation of inputted sinusoidal signal with changing frequency.

Online compensation method for disturbing torque of laser gimbaled seeker using STUKF

Study on Kalman Dynamic Prediction and Feedback Parameter Optimization of Laser Tracking System

Laser Collimation Method Based on Differential Compensating Beam Drift

Two-Axis Optoelectronic Stabilized Platform Based on Active Disturbance Rejection Controller with LuGre Friction Model

A Position Control Based on Active Disturbance Rejection Controller Considering Parameter Variations of Harmonic Drive Gear Systems

Disturbance estimation and compensation of free space optical communication coarse tracking system

Electromechanical coupling modeling and fractional-order control of the seeker stabilization platform

Self-Stabilizing Control Strategy of Stabilized Platform for Rotary Steerable Drilling System Based on Adaptive Backstepping Control

Adaptive Dynamic Friction Compensation for an Electro-Optical Platform Inertial Stabilization System

Adaptive Fixed-Time Fault-Tolerant Tracking Control for Rotary Steerable Drilling Tool Systems

Line-of-Sight Angular Rate Estimation of Strapdown Optical Image Seeker

Estimation of Full Strap-down Rotating Bomb Guidance Information Based on Unscented Kalman Filter

Trajectory Tracking of UAVs Using Sigmoid Tracking Differentiator and Variable Gain Finite-Time Extended State Observer

Multi-Channel Phase-Compensated Active Disturbance Rejection Control with an Improved Backstepping Strategy for Electro-Optical Tracking Systems

Backstepping sliding mode control of stabilized platform for fully rotary steerable drilling system based on nonlinear disturbance observer

A Reliable Gravity Compensation Control Strategy for dVRK Robotic Arms With Nonlinear Disturbance Forces

Accurate Estimation of Line-of-sight Rate under Strong Impact Interference Effect

On Disturbance Rejection Control for Inertial Stabilization of Long-Distance Laser Positioning with Movable Platform

Research on High-Stability Composite Control Methods for Telescope Pointing Systems under Multiple Disturbances

Measurement Compensation for Time-Delay Seeker and Three-Dimensional Adaptive Guidance Law Design