Abstract:For the tribological properties of nanoparticle-modified PTFE, a more comprehensive study has been conducted, but there is still some room for research on tribology behavior, tribofilm formation and structure evolution of polytetrafluoroethylene (PTFE) filled with α-Al2O3 and SiO2 nanoparticles during sliding against steel counterparts under different loads. At the same time, it establishes the linkage and mechanism between the maintenance of mechanical strength and the tribological application of polymers in service and provides corresponding scientific data and theoretical guidance for the long-lasting application of polymer lubrication materials. It is found that both composites exhibit good wear resistance across the pressure of 1 MPa to 10 MPa, with the α-Al2O3/PTFE composite demonstrating better performance stability compared to the SiO2/PTFE composite. The high wear resistance is attributed to the formation of tribofilms at the friction interface. For the α-Al2O3/PTFE, an island-like tribofilm is formed with a thickness ranging from 100 to 200 nm, while the tribofilm of the SiO2/PTFE composite is thinner, measuring approximately 50 to 100 nm, and manifests a striped pattern. The chemical composition, both at the surface and subsurface levels, as well as the morphology of the tribofilms, were studied using FTIR spectrometry, X-ray photoelectron spectroscopy (XPS), and FIB-TEM. It is found that the difference in thickness and microstructure of the tribofilms for the two composites is mainly due to the tribochemistry of the nanoparticles. The α-Al2O3 nanoparticle plays a "cohesion" role during the formation of the tribofilm, which facilitates the formation of a thicker, more uniform, and stronger adhered tribofilm on the metallic counterpart, making it more robust against higher shear stress.

Influence of Anodizing Time on Morphology, Structure and Tribological Properties of Composite Anodic Films on Titanium Alloy

Effect of Oxidation Time on the Structure and Properties of Ti-25Nb-3Zr-2Sn-3Mo Titanium Alloy Microarc Oxide Film Layer

Influences of pulse frequency on formation and properties of composite anodic oxide films on Ti-10V-2Fe-3Al alloy

Influence of Electrolyte Temperature on Morphology and Properties of Composite Anodic Film on Titanium Alloy Ti-10V-2Fe-3Al

Morphology,microstructure and Tribological Properties of Anodic Films Formed on Ti10V2Fe3Al Alloy in Different Electrolytes

Electrophoretic Deposition of Ptfe Particles on Porous Anodic Aluminum Oxide Film and Its Tribological Properties

Influence of Surface Microstructure on Tribological Properties of PEO-PTFE Coating Formed on Aluminum Alloy

Effect of Anodization Time on Morphology and Electrochemical Impedance of Andic Oxide Films on Titanium Alloy in Tartrate Solution

Study on Anodic Oxidation Process and Property of Composite Film Formed on Ti–10V–2Fe–3Al Alloy in SiC Nanoparticle Suspension

Synthesis of Anodizing Composite Films Containing Superfine Al2O3 and PTFE Particles on Al Alloys

Enhanced tribological behavior of anodic films containing SiC and PTFE nanoparticles on Ti6Al4V alloy

Tribological and Mechanochemical Properties of Nanoparticle-Filled Polytetrafluoroethylene Composites under Different Loads

Electroless Ni-P-Ptfe Composite Coatings on Titanium Alloy and Their Tribological Properties

Investigating the influence of pore-widening time control in electrochemical anodization for the formation of hybrid titanium nanostructures with enhanced superhydrophobicity for improved corrosion resistance efficiency

Preparation and Study on Fretting Tribological Behavior of Composite Lubrication Structure on the Titanium Alloy Surface

Self-lubricated nanoporous TiO 2 -TiN films fabricated on nanocrystalline layer of titanium with enhanced tribological properties

Microstructure and Abrasive Wear Behaviour of Anodizing Composite Films Containing Sic Nanoparticles on Ti6al4v Alloy

Preparation of High-Wearability and Self-lubricating Anode Oxide Film on Aluminum Alloy Surface

Morphology and Growth of Porous Anodic Oxide Films on Ti-10V-2Fe-3Al in Neutral Tartrate Solution

Preparation and Performance Evaluation of Self-Lubricating Composite Coating on Surface of Titanium Alloy

Effect of Low-Friction Composite Polymer Coatings Fabricated by Electrophoretic Deposition and Heat Treatment on the Ti-6Al-4V Titanium Alloy’s Tribological Properties