Abstract:Damping treatments have been extensively used as a powerful means to damp out structural resonant vibrations. Usually, damping materials are fully covered on the surface of plates. The drawbacks of this conventional treatment are also obvious due to an added mass and excess material consumption. Therefore, it is not always economical and effective from an optimization design view. In this paper, a topology optimization approach is presented to maximize the modal damping ratio of the plate with constrained layer damping treatment. The governing equation of motion of the plate is derived on the basis of energy approach. A finite element model to describe dynamic performances of the plate is developed and used along with an optimization algorithm in order to determine the optimal topologies of constrained layer damping layout on the plate. The damping of visco-elastic layer is modeled by the complex modulus formula. Considering the vibration and energy dissipation mode of the plate with constrained layer damping treatment, damping material density and volume factor are considered as design variable and constraint respectively. Meantime, the modal damping ratio of the plate is assigned as the objective function in the topology optimization approach. The sensitivity of modal damping ratio to design variable is further derived and Method of Moving Asymptote (MMA) is adopted to search the optimized topologies of constrained layer damping layout on the plate. Numerical examples are used to demonstrate the effectiveness of the proposed topology optimization approach. The results show that vibration energy dissipation of the plates can be enhanced by the optimal constrained layer damping layout. This optimal technology can be further extended to vibration attenuation of sandwich cylindrical shells which constitute the major building block of many critical structures such as cabins of aircrafts, hulls of submarines and bodies of rockets and missiles as an invaluable design tool.

Topology Optimization Of A Constrained Layer Damping Plate Coupled With An Acoustical Cavity

Acoustic Topology Optimization Of A Plate With Constrained Layer Damping Treatment Coupled With A Cavity

Vibration And Acoustic Optimization Of Body In White Based On The Plate Coupling System

Topology optimization for acoustic radiation of a constraint damping plate

Topology optimization for noise reduction of structures with free damping

Stiffeners layout design for noise reduction using topology optimization

A Hierarchical Optimization Strategy for Position and Thickness Optimization of Constrained Layer Damping/plate to Minimize Sound Radiation Power

Sound Radiation Analysis of Constrained Layer Damping Structures Based on Two-Level Optimization

Topology Optimization for Minimizing the Resonant Response of Plates with Constrained Layer Damping Treatment

Topology optimization of damping layers for minimizing sound radiation of shell structures

Topology optimization for minimizing frequency response of constrained layer damping plates

Topology Optimization of Constrained Layer Damping on Plates Using Method of Moving Asymptote (MMA) Approach

Topology Optimization of Anisotropic Constrained Damping Structures

Topology-Boundary Optimization of Coupled Structural-Acoustic Systems

A Comparative Study on Acoustic Optimization and Analysis of CLD/Plate in a Cavity Using ESO and GA

Topology optimization for constrained layer damping structures under specified-band harmonic excitations

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Substructure-based Topology Optimization Design Method for Passive Constrained Damping Structures.

Topology Optimization of Anisotropic Constrained Damping Structures Based on ESO Method

Optimization of Plate with Partial Constrained Layer Damping Treatment for Vibration and Noise Reduction

Acoustic Topology Optimization of Sound Power Using Mapped Acoustic Radiation Modes